• To disconnect from the electrical supply, grip the plug and pull from the wall outlet. DO NOT pull on the mains cable. • Always use on a dry, level surface. • Do not operate without the fan grills properly in place. • This product is intended for household use ONLY and not for commercial or industrial applications. • If the supply cord or plug is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid hazard. • The appliance conta

• Before connecting the heater, check that the voltage indicated on the rating plate corresponds to the mains voltage in your home / office. •Avoid the use of an extension cord because it may cause the heater to overheat. •Warning. Risk of Fire. Discontinue use if the outlet or plug become hot to the touch. Overheating may indicate a worn or damaged outlet. Consult a qualified electrician for outlet replacement. Safe positioning •Only touch the heater with dry hands • DO NOT position where it ca

AND IRELAND The wires in this mains lead are coloured in accordance with the following code: Blue -Neutral Brown -Live This appliance is fitted with a 13 amp plug. The fuse should be rated at 3 amps and ASTA approved to BS1362. However if the plug is unsuitable, it should be removed from the supply cord and an appropriate plug fitted as detailed below:As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your pl

4. Whilst holding the base cover and round weighted insert with one hand, connect the Page 4 pole to the base, sliding the L-shaped locking lever into the bottom of the pole with you other. 5. Turn the L-shaped locking lever clockwise to securely attach the pole to the base. 6. Set the base on the floor, weight side down. Push the pole ring down until it sits directly on the base. Fan head assembly You are now ready to assemble the fan head 1. Unscew rear grill mounting nut (D) before positionin

• To disconnect from the electrical supply, grip the plug and pull from the wall outlet. DO NOT pull on the cord. • Always use on a dry, level surface. • Do not operate without the fan grills properly in place. • This product is intended for household use ONLY and not for commercial or industrial applications. ASSEMBLY INSTRUCTIONS (See Fig 1.) Base/Pole assembly You will need the base cover (O), round weighted insert (P), pole (K,M), pole ring (N) washer (S) and L-shaped locking lever (Q). 1. S

WE STRONGLY RECOMMEND USING THE ORIGINAL BOX FROM PURCHASE. FITTING A REPLACEMENT PLUG FOR U.K. AND IRELAND ONLY. If the plug is not suitable for the socket outlets in your home, it can be removed and replaced by a plug of the correct type. Please refer to "Installation of a plug" below. INSTALLATION OF A PLUG APPLICABLE TO U.K. AND IRELAND The wires in this mains lead are coloured in accordance with the following code: Blue -Neutral Brown -Live This appliance is fitted with a 13 amp plug. The f

THIS PRODUCT IS MANUFACTURED TO COMPLY WITH THE E.E.C. DIRECTIVES 73/23/EEC, 89/336/EEC AND 98/37/EEC. ®® 9100010004571 BASF40WIUK04EM1 BASF40W CONTEMPORARY STAND fan INSTRUCTION MANUAL Holmes Products (Europe) Ltd 1 Francis Grove London SW19 4DT England Fax: +44 (0)20 8947 8272 Email: info-europe@theholmesgroup.com Website address: UK - Free phone Customer Service Helpline – 0800 052 3615 BASF40WIUK04EM1 V1.qxd 12/20/04 4:22 PM Page 4 U.K. and IRELAND PLEASE READ AND SAVE THESE IMPORTANT INSTRU

Retain for future reference. Instruction Leaflet INFO-LINE If after having read this leaflet, you have any questions or comments on your heater, call 1-800-253-2764 in North America. 127555/9100020008876 . BFH3521-UM_08ESM1.qxd 5/9/08 11:32 AM Page 1 3. By pressing the Arrow Buttons ( / ), program the heater to turn off in up to 16 hours from Digital Tower HEATER FAN BFH3521Read instructions before operating. Retain for future reference. Instruction Leaflet INFO-LINE If after having read this le

Instruction Leaflet INFO-LINE If after having read this leaflet, you have any questions or comments on your heater, call 1-800-253-2764 in North America. Remote Control Tower Fan Heater MODEL BFH6500126965/9100020008812Read instructions before operating. Retain for future reference. Instruction Leaflet INFO-LINE If after having read this leaflet, you have any questions or comments on your heater, call 1-800-253-2764 in North America. Remote Control Tower Fan Heater MODEL BFH6500126965/91000200

If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE IN ANY WAY. OPERATING INSTRUCTIONS 1. Set fan base on a dry and level surface where fan cannot accidentally be tipped over. 2. Plug into any standard 120 volt AC outlet. 3. Make sure fan is OFF ( 0 ), then grasp fan head in both hands and tip downward or upward to direct its cooling