Assessments - 2, GPA: 3
(
)
)
|
Facilidade de uso
AC Adaptor 1 pc. Battery Pack 1 pc. A/V Cable (PV-DAC11) with AC Cable (CGR-D08/CGR-D08R) (LSJA0280) and DC Cable 1 pc. Lens Cap (LSVF0518) 1 pc. Shoulder Strap with Lens Cap Strap (LSFC0012) (LSGQ0066) Microsoft® and Windows® are registered trademarks of Microsoft in the United States and other countries. Intel® Pentium® is a registered trademark. ¡.LINK is a trademark. PHOTOVU LINK is a registered trademark. IBM is a registered trademark of IBM Company. Record Speed/Playback Time ■ Erase Protection Use only those tapes having the Mini|XT logo indicating the 6.35 mm digital standard. Cassettes have a sliding record tab to ensure recordings are not accidentally erased. 1 To prevent accidental erasure: Slide the tab to the left (open). record tab To record again: Slide the tab to the right (close). 6 For assistance, please call : 1 -800-211-PANA(7262) or send e-mail to : consumerproducts® panasonic.com Before Using Easy Cassette Eject/Insertion If the Palmcorder is connected to a power source, the cassette can be inserted and ejected without turning the Palmcorder on. 4pushto 2tape eject CLOSE 1 LCD-OPEN Cassette Compartment Cover Before you begin- • Connect the Palmcorder to a power source, (pp. 11,12) 1 2 Press LCD-OPEN to unlock the LCD monitor, and swing it fully open. Slide TAPE EJECT to open the Cassette Compartment Cover. Insert a cassette record tab up, window side facing out. Press PUSH TO CLOSE to close the Cassette Compartment Cover. •To remove the cassette... Slide TAPE EJECT to open the Cassette Compartment Cover and pull the cassette tape straight out. Note • When inserting the cassette, make sure it is facing the right directior and then push it in completely. Attaching the Shoulder Strap ■ Adjust the Length 1 2 Undo the two strap ends from their buckles. Thread the strap ends through the Strap Attachment Rings. Reinsert the strap ends through their buckles. • Make sure the straps are not twisted. © © i O 1 2 Loosen the strap from the Buckle and create a loop. Pull the strap firmly through the Buckle to shorten or lengthen the strap. ^ t® o^ 7 Before Use Before Using Hand Strap Adjust the length of the Hand Strap to the size of your hand as illustrated. Hand Strap Using the Built-in Light To brighten the natural colors in a scene. Built-in Light Using Light reduces battery time. Provide adequate ventilation if using Light in a hot environment for a long time. Set LIGHT to OFF when not in use. When replacing the bulb, see page 48. Lens Cap Attaching the Lens Cap Strap: Thread the Lens Cap Strap through the Strap Attachment Ring as shown. Attaching the Lens Cap Cord to the Hand Strap: Remove the Hand Strap from the front clasp and thread the Strap through the loop in the Lens Cap Cord. Reattach the Hand Strap. Before you begin- • Connect the Palmcorder to a power source, (pp. 11, 12) • Set POWER to CAMERA. 1 Hold down LIGHT for more than 0.7 seconds to turn ON or OFF. •“;D” will appear on the screen. r:-] f * r:m I c is ml-» - LIGHT Caution- This light becomes hot during operation. Make sure nothing covers the light during operation. 8 For assistance, pleasecall: 1-800-211-P AN A(7262) or send e-mail to: consumerproducts@panasonic.com Quick Guide Insert the Battery Pack Before you begin— • Charge the Battery, (p. 11) Protection Film Remove the Protection Film before use. Insert the Battery Pack and slide it up until it locks with a click. Insert Cassette These Palmcorders are equipped with the Easy Cassette Eject System so it is easy to insert or remove tapes, even when on a tripod, (p. 7) 1 Press LCD-OPEN to unlock the LCD monitor, and swing it fully open. Press PUSH TO CLOSE mark to close the Cassette Compartment Cover. Set POWER to VCR or CAMERA. Slide TAPE EJECT to open the Cassette Compartment Cover. Insert a cassette record tab up, window side facing out. • Make sure the record tab is closed, (p. 6) 9 Before Use Quick Guide Camera Recording When the LCD monitor is fully open, the Viewfinder automatically turns OFF. Set POWER to CAMERA. Adjust the Vision Adjustment Control to your eyesight. Viewfinder 4 Press REC/PAUSE to start recording. Press REC/PAUSE again to pause recording. Press LCD-OPEN to unlock the LCD monitor. Swing it fully open and adjust the angle. To Watch Playback in the LCD (Liquid Crystal Display) When the LCD monitor is fully open, the Viewfinder automatically turns OFF. Before you begin — • Charge the Battery, (p. 11) Press LCD-OPEN to unlock the LCD monitor. Swing it fully open and adjust the angle. Set POWER to VCR. Press +4 (REW) to rewind the tape. Press ► (PLAY) to start playback. Press ■ (STOP) to stop playback. 10 For assistance, please call: 1 -800-211 -PANA{7262) or send e-mail to: consumerproducts@panasonic.com Supplying Power Charge the Battery Pack on the AC Adaptor 1 CHARGE Lamp Connect and plug in the Power Cord as shown. •...