Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
5. Spot Monitor Button (SPOT)
21. Function Button (FUNCTION)
This button is used to operate the spot monitor con-
This button is used to display the VTR playback
nected to the SPOT OUT connector.
picture with the camera pictures on the multiscreen
The LED (Green) in the button lights up to indicate
monitor.
that the spot monitor is selected.
During the setup, this button is used to select the
next page.
6. Multiscreen Monitor Button (MULTISCREEN)
This button is used to operate the multiscreen
22. Preset Position Button (PRE-POSI)
monitor connected to the MULTISCREEN connec-
This button is used to assign a preset position to a
tor.
specified camera.
The LED (Green) in the button lights up to indicate
that the multiscreen monitor is selected.
23. Still Button (STILL)
Note: When REC OUT is used as Multiscreen 2
Increment Button (+)
Output, this button alternately selects multi-
This button is used to still the picture displayed on
screen output or multiscreen 2 output.
the multiscreen monitor.
The LED blinks to indicate that the multiscreen
The LED (Green) in the button lights up to indicate
2 output is selected.
that the still mode is selected.
During the setup, this button is used to select the
7. Multiscreen Selection Button (MULTISCREEN
desired parameter in the setup menu.
SELECT)
This button is used to select the multiscreen pattern
24. Electronic Zoom Button (EL-ZOOM)
to be displayed on the multiscreen monitor while
Decrement Button (–)
monitoring the camera picture or VTR playback
This button is used to zoom the picture presently
picture.
displayed on the multiscreen monitor.
Pressing this button repeatedly will switch the
The LED (Green) in the button lights up to indicate
screen as follows:
that the zoom mode is selected.
Camera Picture:
During the setup, this button is used to select the
4→7→9→10→13→16→4 screen segments
desired parameter in the setup menu.
VTR Playback Picture:
4→9→16→4 screen segments
25. Home / Set Button (HOME / SET)
This button is used to return to the home position of
8. Sequence Button (SEQUENCE)
the camera.
This button is used to activate the sequence mode.
During the setup, this button is used to display a
In this mode, a series of camera pictures is dis-
submenu in the setup menu if the item has its own
played in succession on the monitor screen for the
setting menu.
specified duration.
The LED (Green) in the button lights up to indicate
26. Direction Arrow Buttons
that this mode is selected.
These buttons are used to operate the Pan/Tilt
Head manually, or to move the cursor to the
9. Camera Number Buttons (CAMERA)
desired position in the setup menu of the Video
Preset Position Number Buttons
Multiplexer.
(PRESET POSITION)
CAMERA:
UP:
Upward
These buttons are used to select the desired
DOWN:
Downward
camera picture.
LEFT:
Left
The LED (Green) in the button lights up to indi-
RIGHT:
Right
cate the camera number presently selected.
PRESET POSITION:
27. Auto Button (AUTO)
These buttons are used in combination with the
This button is used to activate the auto panning
PRE POSI button to assign a preset position
function when the specified camera is connected.
number to the selected camera.
28. Iris Control Buttons (IRIS, CLOSE / OPEN)
10. VTR / Camera Selection Button (VTR / CAM)
These buttons are used to close or open the lens
This button is used to select the camera picture or
iris of the specified lens mounted on the camera.
VTR playback picture to be displayed on the multi-
When these buttons are pressed at the same time,
screen monitor screen.
the lens iris is reset to the factory settings.
The LED (Green) in the button lights up to indicate
that the VTR mode is selected.
29. Focus Control Buttons (FOCUS, NEAR / FAR)
Note: The above operation is not valid unless multi-
These buttons are used to adjust the lens focus of
screen output is selected by pressing the
the specified lens mounted on the camera.
Multiscreen Monitor button.
When these buttons are pressed at the same time,
the lens focus is automatically set.
11. Control Panel
Press “PUSH OPEN” to open the control panel.
-5-
...