Assessments - 4, GPA: 4
(
)
)
|
Fotos e especificações Sharp KC-850E |
Facilidade de uso
Short circuit and/or electrical shock may occur as a result. • Do not use hot water (40 °C), chemical agents, aromatic substances, dirty water, or other damaging substances, deformation and/or malfunction may occur. • Use only fresh tap water. Use of other water sources may promote the growth of mold, fungus and/or bacteria. E-7 KC-840E_Eng2.indd 7 ■e- 08.10.10 9:23:26 A M ■a- 1 ■ OPERATION ( MAIN UNIT DISPLAY J Filter Reset Button/ Indicator Light (red) Plasmacluster ON/OFF Button/ Indicator Light (green) I Power ON Button Power OFF Button Light Control Button Fan Speed Button/ Indicator Light (green) Press any of the buttons to select mode and start the unit. Clean Air & Humidify MODE Button/ CLEAN ION SHOWER MODE Button/ Indicator Light (green) Clean Air MODE Button/ Indicator Light (green) Indicator Light (blue) CLEAN AIR & HUMIDIFY MODE- Use the Clean Air & Humidify Mode to quickly clean the air, reduce odours and to humidify. A Fill Water Tank. (See E-7) , - &.CT 2 Press the CLEAN AIR & HUMIDIFY MODE Button. — • If the power cord was not unplugged between uses, the unit will automatically re-start at the previously selected settings. CLEAN AIR & HUMIDIFY ON 3 Press the FAN SPEED Button to select the de- fi-i.......1 ( j> sired fan speed. • Indicator lights will show the fan speed currently selected. r o P*o$f-+o © ►o ©-►o Press the Power OFF Button to turn the unit off. About Automatic Humidify Mode The Temperature/Humidity sensors automatically detect and adjust humidity according to changes in room temperature. Depending on the size and humidity of the room, humidity may not reach 55~65 %. In such cases, it is recommended that CLEAN AIR & HUMIDIFY/MAX MODE be used. Temperature Humidity ~18 °C 65 % 18°C~24°C 60 % 24 °C~ 55 % E-8 KC-840E_Eng2.indd 8 ■e- 08.10.10 9:23:26 A M ■ ■■ CLEAN AI RON CLEAN AIR MODE Use the Clean Air Mode when additional humidity is not required. 1 Press the CLEAN AIR MODE Button on the display. • If the power cord was not unplugged between uses, the unit will automatically re-start at the previously selected settings. 2 Press the FAN SPEED BUTTON to select the desired fan speed. vj -Ol Indicator lights will show the fan speed currently selected. c: o P-+o£i£-+o © ►o ©-►o Press the Power OFF Button to turn the unit off. CLEAN ION SHOWER MODE CLEAN ION SHOWER Mode with humidification releases high-density Plasmacluster ions. By continuously discharging strong airflow for 15 minitues, the unit effectively removes airborne dust, pollen, mold and allergens from the air as they are drawn through the filter system. Water must be in the Water Tank when this mode is selected. The unit humidifies when there’s water in the Water Tank, and it operates without humidifying when there’s no water in it. 1 Press the CLEAN ION SHOWER MODE Button on the display to select this mode. When the operation finishes, the unit will return to the prior operation. -M: - Äj CLEAN ION SHOWER ON (15min, HIGH) Press the Power OFF Button to turn the unit off. <£> Fan Speed Button Please note the fan speed cannot be adjusted during the CLEAN ION SHOWER MODE. POLLEN f# mode operation MAX operation © MEDIUM operation © LOW operation 1 The fan speed is automatically switched (between HIGH and LOW) depending on the amount of impurities in the air. The sensors detect impurities for efficient air purfication. The unit will operate at High Level for 10 minutes, then will atternate between MEDIUM and HIGH. 10 minutes «- 20 minutes High fan level Medium fan level High fan level The unit will operate at maximum fan speed. The unit will operate at medium fan speed. The unit will operate quietly using minimal air intake. *HiGH fan speed is an intermediate speed between MEDIUM and MAX. E-9 -e- KC-840E_Eng2.indd 9 ■e- 08.10.10 9:23:27 A M 1 ■■ iu u ■r 1 OPERATION IB 1 - Plasmacluster ON/OFF Button Press the Plasmacluster ON/OFF Button to turn Plasmacluster Ion Mode ON and OFF. When Plasmacluster is ON, both the Indicator Light and Plasmacluster Indicator Light turn on. o [ON/QFi LIGHTS CONTROL Button Use when the light on the front panel is too bright. Refer to the diagram on the right to select the desired brightness on the front panel. -Ö- iftôê (caution) The lights on the front monitor are always brighter when starting. r-S-J ......The lights on the front panel are brighter. IOJ ......r'^T') The lights on the front panel are darker. r ^ i ^— I OJ ................................The lights on the front monitor turn off. WATER SUPPLY INDICATOR LIGHT When the Water Tank is empty, the Water Supply Indicator Light will flash to indicate that the Water Tank should be refilled. Please note the light will not flash even when the Water Tank is empty during the Clean Air Mode and the Clean ION SHOWER Mode. Flashing Sound indicator setting for water supply. In addition to the Indicator Light, the unit can...
Este manual também é adequado para os modelos :Air - KC-840E (11.54 mb)
Air - KC-860E (11.54 mb)