Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Taste and odour of the water may be improved by installing the enclosed water filter. The enclosed water filter will filter only particles out of the supply water, not bacteria or microbes. Dispensing water 1. Hold a suitable container under the ice and water dispenser. 2. Press the water dispenser button until the required quantity of water is in the container. Tip: The water from the water dispenser is cooled to the proper temperature for drinking. If colder water is desired, place ice cubes in your glass before drawing the water. Dispensing ice 1. Hold a suitable container under the ice and water dispenser. 2. Press the ice cube or crushed ice dispenser button until the required quantity of ice is in the container. Note Only press the button long enough to fill half the container. Ice in the discharge may cause the receptacle to overflow or block the discharge. After switching over from dispensing ice cubes to crushed ice, the dispenser may still contain whole ice cubes or pieces of ice cube. Thesewill be dispensed with the first portions of crushed ice. Removing and cleaning the water collecting tray Spilled water collects in the water collecting tray. The water collecting tray can be emptied and cleaned by pulling it out. Removing and cleaning the ice cube container If ice cubes have not been dispensed for a prolonged period, they will shrink, have a stale taste and stick together. S Pull out the container, empty and clean with lukewarm water. S Thoroughly dry the container and screw conveyor to prevent new ice cubes from sticking. Inserting the ice cube container S Push the ice cube container all the way back onto the supports until it locks into position. SIf the container cannot be pushed allthe way back, twist the screw conveyor in the container. Ice cube production continues. en en Disconnecting the ice cube maker If ice cubes are not to be dispensed forlonger than 1week (e.g. holiday), temporarily disconnect the ice cube maker to prevent the ice cubes from freezing together. S Press the "alarm/lock" button, the "button lock" symbol appears. SPress and hold the "freezer/super" and quick ice buttons at the same time for 5seconds until the audible warning signal sounds. S Remove the ice cube container, empty and reinsert. Ensure that the ice cube container engages with the support. Note The dispensing buttons for ice cubes or crushed ice do not work; an audible warning signal sounds when you press these buttons. Switching on the ice cube maker again: S Press the "alarm/lock" button, the "button lock" symbol appears. S Press and hold the "freezer/super" and quick ice buttons at the same time for 5seconds until the audible warning signal sounds. Water filter ! Warning In places where the water quality is suspect or unknown, do not use theappliance without adequate disinfection before or after filtering. A new filter can be obtained from after sales service. Change the filter at least every 6months...
Este manual também é adequado para os modelos :Frigoríficos - KAD80A40SA/01 (4.58 mb)