Assessments - 0, GPA: 0 ( )

Fabricante : Bosch Arquivo Tamanho: 673.76 kb Arquivo Nome : Língua de Ensino:

The rating plate is located in the appliance at the bottom left-hand side. The mains connection cable may be replaced by an electrician only. Warning! Never connect the appliance to electronic energy saver plugs (e.g. Ecoboy: Sava Plug) or to power inverters which convert the direct current to 230 V alternating current (e.g. solar equipment, power supplies on ships). en Switching on the appliance Fig. W Refrigerator and freezer compartments can be switched on separately. • Press the On/Off button (1) to switch on the refrigerator compartment. The light inside the refrigerator compartment switches on when the door is open. • Press the On/Off button (7) to switch on the freezer compartment. • Warning display, Fig. W/5, illuminates until the operating temperature has been reached. Selecting the temperature Fig. W The following standard settings have been set at the factory: Refrigerator compartment temperature +4 .C Freezer compartment temperature –20 .C The set values can be changed, see Description of control panel: 2 Set refrigerator compartment temperature 4 Set freezer compartment temperature Operating tips • The fan (Fig, Q/18) turns itself on and off as required by the refrigrator compartment. • The sides of the housing are sometimes heated slightly. This prevents condensation in the area of the door seal. • While the refrigerating unit is running, beads of water or hoarfrost form at the back of the refrigerator compartment. This is quite normal. It is not necessary to scrape off the frost or wipe off the beads of water. The rear panel defrosts automatically. The condensation is conveyed down the drainage channel, Fig. I/A, to the refrigerating unit where it evaporates. • If the air humidity is high, condensation may form in the refrigerator compartment, especially on the glass shelves. If this is the case, pack or wrap the food and select a lower temperature in the refrigerator compartment. • If you cannot open the freezer compartment door immediately after closing it, wait 2–3 minutes until the partial vacuum has equalised. • The refrigeration system may cause several areas of the freezer shelves to frost quickly. This does not affect function or power consumption. The appliance does not require defrosting until the entire surface of the freezer shelf is covered with more than 5 mm of frost or ice. • Do not allow grease or oil to come into contact with plastic parts inside the refrigerator or the door seal. Both this plastic and the rubber door seal. Both this plastic and the rubber door seal are liable to perish. • To enhance appliance performance to the full, do not place foodstuff near to refrigerator compartment sensor (fig. Q/19). en Switching off and disconnecting the appliance Switching off the appliance Fig. W Refrigerator and freezer compartments can be switched off separately. • Press the On/Off ...

Baixe o seu

Para fazer o download, introduza 2 dígitos :