Extension cord use is determined by the input amp rating (2.2 amps) of the charger. Minimum size (AWG rating) of a 25 foot cord is 18 gauge. Minimum size (AWG rating) of a 50 foot cord is 18 gauge. Minimum size (AWG rating) of a 100 foot cord is 14 gauge. Minimum size (AWG rating) of a 150 foot cord is 12 gauge. Never alter extension cords. SKU 03418 For technical questions, please call 1-800-444-3353. Page 6 Operation (continued) Preparing the Battery 1. If necessary, remove the battery from th

Do not modify the power cord plug provided with the Charger. Do not use the Charger if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. Double Insulated Chargers: Chargers with Two Prong Plugs Outlets for 2-Prong Plug Chargers marked “Double Insulated” 1. do not require grounding. They have a special double insulation system which satisfies OSHA require

3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: Read this material before using this product. Failure to do so can result in serious injury. Save this manual. Copyright© 2009 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual p

14. Use this product in accordance with the battery’s and vehicle’s instruction manual recommendations, safety warnings and charging instructions. 15. Never leave Battery Charger unattended. 16. Batteries can explode under certain conditions; excessive heat and/or poor ventilation can cause explosive gas buildup and battery explosion. Surges in electrical power supply could possibly cause battery explosion. Battery Charger should be plugged into a surge protection device. SKU 45005 For technical

(h) See operating instructions for length of charge information. 16. Follow these steps when battery is outside vehicle. A spark near battery may cause battery explosion. To reduce risk of a spark near battery: (a) Check polarity of battery posts. POSITIVE (POS, P, +) battery post usually has larger diameter than NEGATIVE (NEG, N, -) post. (b) Attach at least a 24-inch-long 6-gauge (AWG) insulated battery cable to NEGATIVE (NEG, N, -) battery post. Place the other end of this cable on a dry insu

WARNING! Risk of explosive gases: 1. Working in the vicinity of lead-acid batteries is dangerous. Batteries generate explosive gases during normal battery operation. For this reason, it is of utmost importance that each time before using this Battery Charger you read and under- stand all safety warnings and precautions as outlined in this manual and those manuals published by the battery and vehicle manufacturers and manufacturers of any equipment you intend to use in the vicinity of the battery

The model BCLSM charger will charge virtually all 3.6 to 7.4Volt Li-Ion batteries,as well as, one or two AA or AAA size NiMH / NiCd type rechargeable batteries. It's unique and patented contact system allows for this one charger to connect to and charge virtually any shape battery regardless of the type of contacts or their location on the battery without the need for any additional adapter plates. Extremely compact and light weight, this is the ultimate charger for travel. This charger will ope

14. Risk of Explosion! If you detect gas, do not switch off the unit. Do not disconnect the charging • clamps. Immediately ventilate the room by opening windows and doors. Do not switch on an electrical fan. When the air has cleared of gas, unplug the unit from the electrical outlet. Charge the battery in a well-ventilated area.• To prevent sparking due to electrostatic discharge, never wear clothes made of • synthetic materials when charging the battery. Avoid creating or working around any fla

9. Never allow the Red and Black Charger Clamps to touch each other or the same metal object. 10. Always connect the Black Charger Clamp of the Charger to the negative (--) terminal on the battery. 11. Always connect the Red Charger Clamp of the Charger to the positive (+) terminal on the battery. 12. When connecting the Charger Clamps to the terminals on a battery, always connect the Red Charger Clamp first, then connect the Black Charger Clamp. When disconnecting the Charger Clamps, always dis