Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
Now with AC/DC compatibility and new optional accessories for greater portability, the RoomMate II system can go anywhere you want to go to provide yen with full, clear stereo sound. So that you can fully enjoy your new system, we recommend that you lake the time to read this owner's guide thoroughly. WARNING To reduce the risk of (ire or electric shock, do not expose this system to rain cr moisture. CAUTION To reduce the risk of shock, do not remove the cover of this system. There are no user-serviceable pads inside. Refer sen'icing to qualified service personnel. 7?ie CAUTION marks sftovvn on this page are located on tlte back of your system. A The lightning flash, with arrov/liead symbol within an equilateral triangle. is intended to alert the user to the presence of uninsulated "dangerous voltage" within the system enclosure that may be of sufficient magnitude to constitute a risk of electric shock. A The exclamation point within an equilateral triangle, as marked on the system, is intended to alert the user to the presence of important operating and maintenance instructions in this owner's guide. CAUTION SISK OF ELECTI CAL SH-XK-CO КОГ Of=£N горяедал r.ectfk4Lskxx do mot fæmOvE •yy,£R !■>:■ USgR-SCTMC&lEl К FAKtS IMSC€ RSBVSERtfCiNG гоои.ч.нпп eeæiM'jH. ГО PRP.R1T RRECfi SHOCK HbZM^U. DO 401 fcXPOSt TH* LMIT TORAH OP MDSTURE AVIS re-cuE i:u снос ьиспэхе-t c эдасо/ав №M CG PRÉvOJR Ш CHOC СЛОТЯ^С NE PAS BJ.P-Cr. l£ ОЭ1МЗ*Х£ АРПН-Я II. NE ©E ТОХЛ6 A L'INTÉREUR AUCUN: PÈCE POUVANT ЁТЯЕ RÊPAK& PAR USAGER irADPKSOT-: À LU ВЁР/ЛЛТЕ1Л OCf.PÈISU. Warning Never disassemble any pari of your RoomMate II system There are no user-serviceable parts inside. Never connect your RcomMate II system to the Speaker outputs of a receiver or amplifier, since it could be damaged if connected in this manner. Important Safety Instructions Before You Begin... To avoid potential problems and hazards, please observe the following. 1. Read instructions. Read all of these safety and operating instructions before you use your RoomMate)9 II system. 2. Retain instructions. Retain these safety and operating instructions for future reference. 3. Heed warnings. Adhere to all warnings on the RoomMate II systr^m* and in these operating instructions^^ 4. Follow instructions. Follow all operating and use instructions as outlined in this guide. 5. Water and moisture. Never use your RoomMate II system near water -for example, near a bathtub, sink, laundry tub, in a wet basement, near a swimming pool. etc. 6. Mounting. Use only Bose' MMA-4 Mounting Arms to mount your Room-Mate II system. Consult the instructions supplied with the mounting arms and mount your RoomMate II system only in the manner recommended by Bose. 7. Ventilation. Be sure to provide adequate ventilation for the LEFT (POWERED ) speaker that has the AC (mains) line cord and audio input cables going into it. For example, the LEFT (POWERED) speaker should not be placed in a built-in bookcase or cabinet that may impede the flow of air around the system. 8. Heat. Avoid placing the system near direct heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. Avoid placing the system in direct sunlight. 9. Power sources. The RoomMate II system is available for connection to AC lines (mains) of various voltages. If your unit has a line voltage selector switch on the back, make sure the selector is in the correct setting, e.g. set to 115V for U.S. and 230V for Europe. The RoomMate II can also be connected to 12V DC voltage sources such as the rechargeable Bose PC-1 powercase battery designed for use with this system, as well as automo- •'e or marine power sources. Ob-?/ve the connections to the source. Note: For portable applications, the RoomMate II system should be used only with the Bose PC-1 powercase. 10. Power cord protection. Route the power supply (mains) cord so that it will not be walked on, cut, or pinched by items placed upon or against it. Pay particular attention to cord at plug, and at the point where it connects with the RoomMate II system. 11. Non-use periods. If the RoomMate II system is not going to be used for any length of time, unplug it from the wall outlet. Always unplug the unit by grasping the plug itself. Never pull the plug out by the cord. Also, if the system is connected to the battery or other DC power source and is not going to be used for several hours or more, unplug the system from the DC power source. ^^2. Object and liquid entry. Take care that objects do not fall and liquids do not spill into the enclosure of the RoomMate II system through the openings. 13. Cleaning/care and maintenance. The RoomMate H system requires very little maintenance. Occasional cleaning should be done with a damp cloth WHILE THE SYSTEM IS UNPLUGGED. Never use any chemicals to clean your system, and never allow any liquids to enter the unit’s openings. 14. Use with other system...