You should immediately contact your dealer if the subwoofer is damaged . 2. INSTALLATION There are different methods to connect your subwoofer to a HiFi / Home Theater system. In the following text we explain 2 different ways. NOTE! Do not connect the mains cord until all other installation is completed. 2.1 To an amplifier / pre-amplifier with Subwoofer pre-out terminal. Connect the enclosed RCA cord from your amplifiers subwoofer-out terminal to LINE IN on the subwoofer. Use the anclosed Y-ada

19145 Gramercy Place, Torrance, California 90501, U.S.A. Tel.: (310) 326-8000 ALPINE ELECTRONICS OF CANADA, INC. Suite 203,7300 Warden Ave. Markham, Ontario L3R 9Z6, Canada Tel.: (905) 475-7280 ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 6-8 Flveways Boulevarde Keysborough, Victoria 3173, Australia Tel.: 61 (3) 9769-0000 ALPINE ELECTRONICS GmbH Kreuzerkamp 7-11 40878, Ratingen, Germany Tel.: 49 (2102) 4550 ALPINE ELECTRONICS MANUFACTURING OF EUROPE H-2051 Biatorbagy, orfzag ut. 2, Hungary Te

At this point, it is a good idea to secure the speaker wire to a stud near the cutout so its own weight will not tug on the terminals of the speaker after it is connected. This will also prevent you from "losing" the wire in the ceiling. Before attaching the wire, make sure the speaker wire runs through, not around, the metal mounting bracket. installation preparation Use the supplied template to outline the mounting hole. Cut the mounting hole and remove any debris from the area. Take the neces

5.2 dB. 35Hz Electro-Mechanical Parameters* Nominal Impedance 2Q+2Q 40+40 20+20 40+40 Frequency Response 30 - 700Hz 31 - 700Hz 27 - 700Hz 27 - 700Hz Sensitivity (SPL@1 W/1 m)* 84 dB 84 dB 86 dB 86 dB D.C Coil Resistance (Re) 1.8Q+1.8Q 3.2 Q+3.2 Q 1.80+1.80 3.2 0+3.2 0 Inductance (Le) 1 kHz/20kHz 3.11mH/1.09mH 4.40m H/1.59m H 2.67mH/1.02mH 3.95mH/1.47mH Free Air Resonance (Fs) 33Hz 34Hz 30Hz 31Hz Equivalent Stiffness (Vas) 30L (1.1 ft3) 30L (1.1 ft3) 61L (2.2 ft3) 61L

Connect the speaker outputs of the amplifier to the inputs of the high level connection of the subwoofer with conventional two-conductor speaker wire. Be sure to keep the left/right channel connections correct. Also be sure the phasing of the connections (the positive/negative orientation of the connections) is consistent throughout the system. The left and right channel outputs from the amplifier should be connected to the appropriate high-level inputs on the subwoofer. Of greater importance is

The HT-series subwoofers feature a black wood grain furniture grade finish. These subwoofers are designed to be used with in-wall, bookshelf, or miniature satellite loudspeakers, extending the bass response of the system by an octave or more. The crossovers in the subwoofers can relieve the satellite speakers of the demand of reproducing the deep bass portion of the sound range. The combination of an a/d/s/ subwoofer and high-quality full range speakers produces a system that has the bass respon

19145 Gramercy Place Torrance, California 90501 U.S.A. Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 777 Supertest Road Toronto, Ontario M3J 2M9 Canada Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF AUSTRALIA PTY, LTD. 161-165 Princess Highway, Hallam Victoria 3803, Australia Phone 03-8787-1200 ALPINE ELECTRONICS GmbH Frankfurter Ring 117, 80807 Munchen, Germany Phone 089-32 42 640 ALPINE ELECTRONICS OF U.K., LTD. ALPINE House Fletchamstead Highway, Covent

** Based upon 3/4" (19mm) baffle thickness, with opening cut approximately to gasket inner diameter /////A\JP\NE DUAL 2 n TYPES APPLICATION DIAGRAMS sws-ios3D/sws-iee3D SCHÉMAS D'APPLICATION - TYPES. DOUBLE BOBINE, 2 O_ Example *1 One Amplifier and One Subwoofer Exemple *1 4f amplificateur et *T h.-p. d’extrêmes graves Example 8 One Amplifier and One Subwoofer Exemple S 1 amplificateur et *T h.-p. d’extrêmes graves JUMPER/CAVALIER JUMPER/CAVALIER Example 3 Two Amplifiera and Two Bubwoofer

Coil Resistance (Re) 1.8 0 + 1.80 4.0 Q +4.0Q 1.8 Q + 1.80 3.6 0+3.60 1.8 Q + 1.8Q 3.6 0+3.60 Inductance (Le) 1kHz/20kHz 3.72mH/1.15mH 6.20mH/1.86mH 2.41mH/0.84mH 3.85mH/1.34mH 2.67mH/0.88mH 3.92mH/1.39mH Free Air Resonance (Fs) 23Hz 24Hz 27Hz 28Hz 29Hz 30Hz Equivalent Stiffness (Vas) 98L 98L 58 L 58L 29L 29L Qms/Qes/Qts 9.84/0.40/0.38 9.68/0.50/0.48 8.68/0.40/0.38 8.31/0.45/0.43 8.93/0.40/0.38 8.76/0.43/0.41 X max / X peak 16.5mm/33mm 14.5mm/29mm 13.35mm/26.7mm 13.87mm/27.74mm 13.35mm/26.7