Keep work area clean and well lit. 1. Cluttered or dark areas invite accidents. Keep children and bystanders away while operating a Chain Saw. 2. Distractions can cause you to lose control. Stay alert, watch what you are doing and use common sense when operating a 3. Chain Saw. Do not use this product while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating Chain Saws may result in serious personal injury. Use safety equipment. Always we

cord (not included) to the Power Cord (52) of the Chain Saw. Make sure the electrical cord is away from the cutting area. Figure 4Note: Front Handle Guard not shown in illustration 4. Grasp the Handles with both hands. Always grip the handle with the thumb and fingers encircling the handle as show above. Push forward on the Lock-out Switch 5. (48), then squeeze and hold the Trigger Switch (49). NOTE: The Trigger Switch cannot be activated unless the Lock-out Switch is depressed. With the Chain S

Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn On and Off properly. 16. Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is a

(See Table A.) If you are using one extension cord for 5. more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See Table A.) If you are using an extension cord 6. outdoors, make sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use. Make sure the extension cord is properly 7. wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electr