Assessments - 3, GPA: 4.7 ( )

Fabricante : Samsung Arquivo Tamanho: 150.39 kb Arquivo Nome : Língua de Ensino:

CAUTIO N Do not attempt to repair the CD-ROM drive yourself. Contact your dealer or local SAMSUNG representative for all repairs. Use of controls or adjustments or performance of procedures other than those specified here in may result in hazardous radiation exposure To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. WARRANT Y Please refer to the Samsung limited warranty statements. m 1 Front View of the CD-Rear View of the CD- COMPACT 12 34 5 6 Headphone Connector 1 The audio output connector enables you to plug stereo headphones into the drive. It requires a 3.6 mm stereo mini-jack. Volume Control Dial 2 This control dial adjusts the volume for your headphones. You can only use the headphone jack and volume control when you have installed the required software utilities. For example, the Microsoft Windows Media player can be used. 3 LED 4 Disc Tray The Disc Tray opens and closes automatically when you press the Open/Close button. . When you place a disc in the tray, make sure that the label on the disc is facing upwards. If you are not loading or unloading a disc, the disc tray should remain closed. 5 Emergency Hole If the disc tray does not open when you press the Open/Close button, insert a small metal rod(an unwound paper clip for example) into this hole to eject the disc. . This function should only be performed when the computer is powered OFF. 6 Open/Close-Button When in play, press the stop key and when in stop, press open/close key. 1234 5 Digital Audio 1 You can connect a sound card or MPEG card which support Digital Audio to your drive using this two-pin connector. 2 Audio Output Connector You can connect a sound card to your drive using this four-pin connector. . This function is not covered in detail in this guide. Refer to the documentation supplied with your sound card. 3 Device Configuration Jumper Usually, this is a pre-set configuration as illustrated below. C. S..M. SL A * Verify that the setting is as illustrated. If it is not, simply remove the jumper and place it in the correct position. Host IDE Interface connector 4 This input/output interface connector is used to connect the 40-pin flat cable from the IDE interface to the CD-ROM drive. Power Connector 5 The power connector is a four-conductor male plug. 2 3 System Requirements Before you install the CD-ROM drive, we strongly recommend that you make certain that your set-up meets the system requirements Item Description Type of computer IBM 486SX 20MHz (or higher) with an IDE interface(or a 100% IBM-compatible computer) Free expansion unit 5.25 inch Disk space 100KB minimum MS-DOS version 5.0(or higher) Windows version 3.1(or higher) Installing the CD-ROM Drive Install the CD-ROM drive in your computer horizontally, making sure that the Open/Close button is on the right. To install the drive, proceed as follows. 1 1 Turn OFF your computer. Remember to verify the configuration jumper on the rear ...

Baixe o seu

Para fazer o download, introduza 2 dígitos :