5 FM button, to select the FM radio mode source and select the FM memory banks TS, to start the Travelstore function 6 Display (display field) 7 DIS, change display contents button - indicates the time on the display 8 MENU button - selects the menu for basic settings 9 button - opens the flip/release panel : Arrow-key block ; OK button - confirms menu entries and starts the scan function < DEQ button (digital equalizer) switches the equalizer on/off = AUDIO button - adjusts bass, treble, X-BASS

If the meter read zero regardless of the PITCH SLIDER'S (13) position, the PITCH (10) function is not activated. 43. TIME BAR INDICATOR -This bar visually details the time defined in the TIME METER (44, 45, & 46). As with the TIME METER (44, 45, & 46), this bar is also dependent on the selected time function REMAIN, TOTAL REMAIN, OR ELAPSED (39). This bar will begin to flash when 15 seconds of a track remain and will begin to rapidly flash when three seconds of a track remain. The flashing bar i

The maximum pitch bend percentage allowed is +/- 100%. The pitch bend function will work in conjunction with the PITCH SLIDER (5) pitch setting. For example, if the PITCH SLIDER (5) is set to a 2% pitch gain the pitch bending process will begin at 2% and will continue to the maximum of +/- 100%. NOTE: A -100% pitch manipulation will stop playback entirely. Holding down or tapping on the (+) PITCH BEND BUTTON (7) will provide a speed bump in the playback pitch. Holding down or tapping on the (-)

90058 Rev. 4/05 CONTENTS CONTENTS 3 ELECTRICAL PRECAUTIONS................................................................................................................4 SAFETY INSTRUCTIONS.......................................................................................................................5 VOLTAGE SELECTOR............................................................................................................................5 UNPACKING.....................................

The following steps illustrate the procedures for creating a loop: 1) Press the PLAY/PAUSE BUTTON (8) to activate playback mode. Figure 17 ©American Audio® --CDS-1™ Instruction Manual Page 17 BASIC OPERATIONS (CONT.) BASIC OPERATIONS (CONT.) 2) Press the IN BUTTON (6). This will set a loops starting point. The IN BUTTON (6) LED will briefly indicating a starting point has been set. Figure 18 3) Press the OUT BUTTON (11) to set the ending point for your LOOP (Figure 19). The IN BUTTON LED (9) and

For example, if the pitch slider (5) is set to a 2% pitch gain the pitch bending process will begin at 2% and will continue to the maximum of +/- 16%. Holding down or tapping on the (-) PITCH BEND button (9) will provide a slow down in the playback pitch. Figure 25 Holding down or tapping on the (+) PITCH BEND button (9) will provide a speed bump in the playback pitch. Figure 26 Pitch bend buttons (9): The (+) PITCH BEND button (9) will increase track playback speed and the (-) PITCH BEND button

N DCD-PR0250 DURL CD P L R V € R _n COMPACT gQdm <€ DIGITAL AUDIO digital ^ output ANTI-SHOCK £5$ "Win PROformer Series © American DJ® AUDIO Los Angeles, CA 90058 USA CONTENTS SPECIFICATIONS.................................................................................................................................2 IMPORTANT SAFETY ITEMS SAFETY INSTRUCTIONS...... GENERAL NOTES ON USE............................................................................................

PROG.SGL SGLTIME TIME PITCH BEND PITCH BEND PITCH 00 + PITCH CUECUE DCD-PRO200 MKIII POWER DCD-PRO200 MKIII CONTENTSCONTENTS SPECIFICATIONS.................................................................................................................................2 IMPORTANT SAFETY ITEMS...............................................................................................................3 SAFETY INSTRUCTIONS............................................................................

13. TIME – Este boton se utiliza para cambiar el tiempo en el visor. Se puede visualizar el tiempo como tiempo de pista transcurrido, tiempo de pista restante, y tiempo total restante del CD. 14. SGL – Este boton permite cambiar el modo de reproduccion (play) de la unidad a simple o continuo. En modo simple la unidad reproduce una sola pista y vuelve al modo en espera. En modo continuo la unidad reproduce pista por pista y regresa al modo en espera una vez finalizada la reproduccion de todas las