When connected to the UD-M31, the DRR-M31's CD-SRS function lets you start recording CDs onto tape at the single touch of a button. The DRR-M31 also provides a wealth of editing and playback functions, including One-Touch Auto Reverse and Music Search, to make this deck a truly versatile member of this system. • Horizontal Loading Mechanism for Smooth, Stable Tape Travel • Dolby B Noise Reduction System CD-SRS for One-Touch Recording from CD A Wealth of Editing and Playback Functions One-Touch

The skipped track is cleared from the program. To clear all the reservations Press the FP button repeatedly until “K -“ is displayed, Press it once more to cancel the Karaoke programs. The display returns to that of CD play. m If the reserved track number does not exist on the selected disc, the unit stops playing and the display flashes. In this case, press the a> button to skip the error track. Then press the 4 a button to start play with the next reserved track. When the PRGM button is presse

Voices are reproduced in the front and center sound field, while ambient sounds like cars and crowds are reproduced on all sides of the listener for an incredibly lifelike audio/video experience. Please read the following carefully to “tune” the system’s output to match the characteristics of your listening space. Check the following: Before using the DOLBY PRO LOGIC, adjust the proper balance of speaker sound levels. Make sure the supplied speakers are properly connected and positioned. (See pa

and left to SPEAKERS L terminals. Connect each surround speaker cord to SURROUND SPEAKERS R or L terminal. The speaker cord with the white stripe should be connected to 0terminal and the black cord to 9terminal. Be sure to connect the speaker cords correctly. Improper connections can cause short circuits in SPEAKERS terminals. 4 ENGLISH 3 33333Connect the supplied antennas. POSITIONING THE SPEAKERS Connect the FM antenna to FM 75 . terminals and the AM antenna to AM LOOP terminals. Position the

Time and audio source name flash alternately. 3 Within 6 seconds, press for gto designate the timer-on time, then press a. Pressing either button changes both the hour and the minute. Holding it down will vary the time rapidly by 10-minute interval, and pressing it repeatedly will vary by 1 minute interval. 4 Within 4 seconds, press for gto select the duration for the timer-activated period. The duration can be set between 5 and 240 minutes in 5 minute steps. The duration will be automatically s

Recording/ Playback Cotton swab Erasur tan \/ \ I (1.:Q I,JJn .IJ, \ . After cleaning the heads and tape paths with a liquid head cleaning cassette or a moistened swab, wait until the cleaned parts are completely dry before inserting the tapes. To demagnetize the heads The heads may become magnetized after long-term use. This may narrow the output range of recorded tapes and increase noise, After 20 to 30 hours use, demagnetize the heads with any commercially available demagnetizer. Care of disc

PRECAUTIONS NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee tha

2 Press one of the function buttons to select the source to be mixed, and play it. 3 Adjust the volume and tone of the source. 4 Adjust the microphone volume. You can adjust the volume of the microphones connected to the both of the MIC jacks by the MIC MIXING control at the same time. To record microphone sound mixed with source sound Insert a tape in the deck 2, and press the l REC/REC MUTE button. You can record while using the echoing effect, VOCAL FADER, MULTIPLEX or BBE function. When not

I I Les illustrations de ce mode d’emplol representent Ie CSDEX11OU. I PRECAUTIONS 110-120V 220-240V o- UIll AC VOLTAGE Before connecting the AC cord (LH model only) lq LH model has an AC VOLTAGE selector. Make sure that the AC VOLTAGE selector is set to the position matching your local voltage. If it is not correctly set, change it with a screwdriver or a similar tool, Either 11 O-120V or 220-240V can be selected. On placement . Do not use the unit in places which are extremely hot, cold, dusty

Please refer to them when you contact yourAIWA dealer in case of difficulty. TO REDUCE THE SHOCK, DO NOT RAIN OR MOISTURE, RISK OF FIRE EXPOSE THIS OR ELECTRIC APPLIANCE TO LCX-300 U, K, LH, LCX-301 U 1 I “CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, CAUTION (K model) DO NOT REMOVE COVER (OR BACK). Use of controls or adjustments or performance of procedures NO USER-SERVICEABLE PARTS INSIDE. other than those specified herein may result in hazardous radiation exposure. REFER SERVICING TO QUALIFI