DISC PLAYING 1. Open the CD tray with the OOPENO button. 2. Insert the CD with the printed side facing upwards and push the disc gently unit it clicks so that the disc fits into the pivot. 3. Press the CD door to close. On display windows When you press O O, the display window shows : Total number of tracks First track playing begins During play The track number of the current selection appears. When O O is press during play, total number of tracks on the disc will be displayed and the unit stil

Mount the unit in place, using four self-tapping screws (M5 x 12). Use RTV (silicone sealer) on screw threads or around the holes to prevent moisture intrusion. Set the left and right anti-vibration springs to position "45°". Determine the mounting location, and drill four mount- ing holes. 1 Never mount the unit near the fuel tank. Bracket (L) Bracket (R) Hexagonal bolt with washer base (M5 x 10) Drill holes 4mm in diameter. Bracket (R) Self-tapping screw (M5 x 12) NOTE: Use seals (A) to cover

Select the desired mounting area on your car dashboard that will allow ease of use and full visibility of the LCD display. Peel off the protective paper on the adhesive pad. Make certain the dash area is clean of all wax, grease, etc., and press the remote control in place. Allow a 1/2 hour for the adhesive to secure, then you will find the Velcro pads will allow you to remove the remote control for hand-held use if desired and replace it as often as needed. MOUNTING THE FM MODULATOR There are t

When the volume level between the front and rear speakers is equal, a single bar will be shown on the display panel. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated. 8 LOUDNESS CONTOUR (LOU) When listening to music at low volume levels, this feature will boost the bass and treble ranges to compensate for the characteristics of human hearing. Press the LOU button to activate this feature as indicated by LOUD

OOOOOWNER’SMANUWNER’SMANUWNER’SMANUWNER’SMANUWNER’SMANUALALALALALANDINSTANDINSTANDINSTANDINSTANDINSTALLAALLAALLAALLAALLATIONGUIDETIONGUIDETIONGUIDETIONGUIDETIONGUIDEOOOOOWNER’SMANUWNER’SMANUWNER’SMANUWNER’SMANUWNER’SMANUALALALALALANDINSTANDINSTANDINSTANDINSTANDINSTALLAALLAALLAALLAALLATIONGUIDETIONGUIDETIONGUIDETIONGUIDETIONGUIDE ACD-25 ACD-25ACD-25ACD-25ACD-25ACD-25 DETACHABLE FRONT PANEL AM/FM/MPX RADIO WITH COMPACT DISC PLAYER AND QUARTZ CLOCK RADIO AM/FM/MPX AVEC LECTEUR DE DISQUE CD, HORLOGE

These kits are available at electronics supply stores and car stereo specialist shops. Always check the kit application before purchasing to make sure the kit works with your vehicle. If you need a kit but cannot find it available, call our toll-free “HELP” line at 1-800-645-4994. UNIVERSAL INSTALLATION PROCEDURE USING MOUNTING SLEEVE 1. Remove the detachable front panel if it is attached to the chassis by pushing the “Release” button. Slide the mounting sleeve off of the chassis. If it is locke

• Electrical interference in your home can cause poor reception. Move the unit away from them (especially those with motors and transformers). - 9 - 10 - 11 Repeat Play This function will allow a single track or all tracks on the disc to be played repeatedly. REPEAT function can be operated when playing a disc. 1. To repeat the same track, press the PRESET/REPEAT button until “REPEAT” icon lights up on the display. 2. To repeat the disc, press the PRESET/REPEAT button until “REPEAT ALL” icon lig

DO NOT REMOVE COVER. PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. IMPORTANT NOTES CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (ON BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash and arrowhead within the triangle is a warning sign alerting you of "dangerous voltage" inside the product. instructions accompanying the product. a warning sign alerting

The SCN button (10) scans the first 5 seconds of each track. Note: Power can be turned on by pushing any button on the front of the AWM930. AUXILIARY INPUT 1) Push Power Switch (18) “on”. 2) Using the Source Selectors (19), choose the button labeled “AUX”. 3) If there is an external source (ie. CD shuttle) connected to the Auxiliary In Jacks (22) on the rear of the radio, then you can listen to your external source through the system. 4) An external auxiliary source can also be used (such as a p

7. Left front speaker 8. Right front speaker 9. Left rear speaker 10. Right rear speaker Fuses When replacing a fuse, make sure the new fuse is the correct type and amperage. Using an incorrect fuse could damage radio. The CD3210 uses one 10 amp fuse located below the wiring connector: 10 amp fast blow ATO. Reconnect Battery When wiring is complete, reconnect the battery negative terminal. Install Half-Sleeve Instalacion de la Camisa Installation du demi-manchon 4 1 2 3 Jensen Connector 1 2 Conn