Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
REPLACE ROCKER ARMS Tools required: Snap ring pliers, 3/8 Socket set, and Standard wrench set Step 1 Unplug the unit at the electrical outlet. Step 2 Raise the boot covers on the upper arms then remove three mounting bolts from each upper arm. Step 3 If equipped, remove the clevis covers. Step 4 Remove the nut and bolt securing the PEDAL LEVER to the ROCKER ARM, and lower the pedal lever. Step 5 Remove the END CAP and internal snap from the rocker arm. Step 6 Remove the rocker arm. Step 7 Install the new rocker arm in reverse order. NOTE: For units without clevis covers, plug the square holes in the bottom of the rocker arms with the supplied plugs. NOTE: For units with clevis covers, insert the nylon grommets (nuts) as supplied, then install clevis covers. into square opening M051-00K61-A022...