Log:
Sort : Nome ↑   Downloads   Avaliação   Tamanho ↑  
Downloads : 3   Arquivo Tamanho: 586 kb   Fabricante : DKS Enterprises  
Categoria : Portas e janelas
@name

This will help insure that your installation is performed in an efficient and professional manner. The proper installation of the vehicular slide gate operator is an extremely important and integral part of the overall access control system. Check all local building ordinances and building codes prior to installing this operator. Be sure your installation is in compliance with local codes. 1.1 Specifications Class of Operation: Class III, IV Type of Gate: Vehicular Slide Gates Only Horsepower: 9

Downloads : 2   Arquivo Tamanho: 586 kb   Fabricante : DKS Enterprises  
Categoria : Portas e janelas
@name

Be sure that the operator mounting plate is parallel to the gate. 1.5 Mounting Stand Installation 1. Construct a form for the mounting pad according to the specifications shown below. Be sure to level the top edge of the form and that the top of the form is a minimum of four (4) inches above ground level. We suggest that you contact the local building department to determine the required depth of the pad since soil conditions and code requirements vary from city to city. 2. Set conduits, reinfor

Downloads : 7   Arquivo Tamanho: 586 kb   Fabricante : DKS Enterprises  
Categoria : Portas e janelas
@name

The gate must reverse direction after striking the object. If it does not, increase the reverse sensitivity by turning the potentiometer 1/8 turn clockwise, then repeat this test. NOTE: After the gate has reversed, the operator will assume a "soft shutdown" making it necessary to initiate the cycle again by momentarily shorting across terminals 1 and 5 as in step 1. 7. Place an immobile object along the path of the gate so that the gate will strike it while in the close cycle. The gate must reve





categorias