Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
Using this mode, you can send the same original to 2 or more remote Faxes (multi-address transmission). • Direct Transmission The remote Fax is dialed immediately, and the original will be sent as it is being scanned. This mode is useful if you want to confirm connection to the remote Fax or when you want to send an urgent Fax document. Originals are not stored in memory, and you can only specify one remote Fax at a time. • Direct Entry with digital keys You can dial the telephone number of the remote Fax directly using the digital keys • Address Book Entry You can specify a remote Fax that has been registered into the address book. • Multi-address Transmission You can send the same original to 2 or more remote Faxes in a single operation. • Group Entry Originals are sent to the destinations that have already been specified as a group. • Recovery Transmission A document is held in the memory after the initially specified number of redial attempts have failed. You can retransmit the documents held in memory by touching the screen. • On-hook Transmission You can make a telephone call and then send the originals without picking up the handset of the external telephone. When the line is connected to the remote Fax and a dial tone (short high-pitched tone) is heard, press the [START] button to send the original. You can also use keypad (digital keys) dialing and address dialing. • Off-hook Transmission * Only available if an external telephone is attached. Pick up the external telephone, make a telephone call and then send the originals. When the line is connected to the remote Fax and a response tone (short high-pitched tone) is heard, press the [START] button to send the original. You can also use keypad (digital keys) dialing and address dialing. • Priority Transmission You can send a priority transmission and interrupt the current communication. This function allows you to interrupt the current communication and send the Priority Transmission. Transmission is resumed after completing the current communication. • Polling Transmission You can store originals in memory, and wait for a request from a remote Fax to send the originals. When the request arrives, the originals are automatically sent to the remote Fax that sent the request. The remote Fax can receive originals at any convenient time. You can also inhibit remote Faxes which do not have the corresponding password to receive the originals by appending the password to the document. • Mailbox Transmission You can have confidential, bulletin board and multi-address relay mail communication, transmission box with remote Faxes that support the ITU-T Mailbox functions. 26 Transmission Mode • Delayed Communications You can send the original to a specified remote Fax at a specified time. This mode is useful when you are making use of night-time discounts or sending originals overseas. • Chain Dial Communication When using the Fax communication network, you can combine 2 or more dialing operations (by address book and direct entry), input and send information such as service codes one after another. • Batch Transmission The system will automatically send 2 or more reserved jobs to one remote Fax at a time. This function can reduce the communication cost by sending multiple originals to the same destination at one time. This operation is automatically applied when more than one original is sent to one remote Fax with the same transmission functions specified for each reserved TX job. * When the use of the equipment is managed under the department management or the user management, the batch transmission can be performed only in the same department and user. • Redialing If the remote Fax is busy by using the Memory TX etc., this system will automatically redial the remote Fax number. The default of the redialing intervals and counter is different for each country/region. It can be changed by the service technician. Transmission Mode 27 2 SENDING A FAX 2 SENDING A FAX Preparation for Transmission Switching to the Fax mode 1 Press the [FAX] button on the control panel to select the Fax function. • Be sure to switch over to the Fax mode before carrying out Fax operations. • If you leave the equipment for about 45 seconds, it automatically returns to the copy mode. • You can also switch to the Fax mode when the equipment is in the energy-saving mode. When the use of the equipment is managed under certain functions such as department management When the use of the equipment is managed under the department management or the user management, each user needs to enter the department code, user ID, password, etc. For these operations, see the Operator's Manual for Basic Function. 28 Preparation for Transmission About Originals Original size/Original scanning range Original size The following table shows the size and thickness of originals that can be transmitted via this system. Setting Position Original Type Original Size Maximum Number that Can be Set Remarks Original She...
Este manual também é adequado para os modelos :Fax - GD-1210 (1.41 mb)
Fax - GD-1210 (1.41 mb)
Fax - GD-1210 (1.41 mb)
Fax - GD-1210 (1.41 mb)