Assessments - 7, GPA: 3.7 ( )

Fabricante : Bosch Arquivo Tamanho: 4.39 mb Arquivo Nome : Língua de Ensino:

Fotos e especificações  Bosch  ROTAK 37

B For products not sold in GB: WARNING: For safety, it is essential that the mains plug 5 attached to the product is fitted to the power supply cable 15. The couplings of connection leads must be protected against splashes and the coupling sockets on the leads must be made of rubber or coated with rubber. Fixing means for the connection leads must be used. The connection lead must be inspected for signs of damage at regular intervals and may only be used if in perfect condition. Products sold in GB only: Your mower is fitted with an approved 13 A (BS 1363/A) electric plug and is protected by a 13 A fuse (ASTA Approved to BS 1362). If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorized customer sercive agent. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a 13 A socket elsewhere. Assembly A Handle assembly Insert the handle bottom 8 into the holes provided and secure with the screws. Note: The handle top 3 is height adjustable. Fix han dles in desired position I or II. Attach the handle top 3 with the bolts and wing nuts 14 to the handle bottom 8. Note: Ensure that the cable clips supplied are used to fix the cable to the handle. C ROTAK 34/37 Snap the grassbox top on the grassbox bottom by pushing all the “snap fits” together around the edges starting at rear and working towards the front. D ROTAK 40/43 Snap the grassbox bottom halves together by pushing all the “snap fits” together around the edges starting at rear and working towards the front. Snap together both top and bottom half of the grassbox. Ensure the cables are not trapped when folding/unfolding top handles. Do not drop the handles. GrassboxE Fitting Lift the deflector guard 7 and hold up, fit the grass- box 6. Removing/Emptying Lift the deflector guard 7 and hold up. Remove grassbox 6. For non grass collection the mower can be used without the grassbox 6 in position, with the deflector guard 7 in the down position. Adjusting the Cutting Height Stop, release switch lever and wait until the motor stops before adjusting height. The blades continue to rotate after the machine is switched off, a rotating blade can cause injury. Caution – do not touch rotating blades. The lawnmower can be set to 10 cutting heights between 20 mm and 70 mm. For this purpose, press the height of cut lever 12 inwards then lift or push down the mower until required height is selected. For the first cutting of the season, a high cutting ad- justment should be selected. F B Attach cable to cable restraint 4 ensuring that sufficient cable slack is available. 14 • F016 L70 468 • 06.11 English - 3 F016 L70 468 - Buch Seite 4 Mittwoch, 8. November 2006 4:13 16 F016 L70 468 - Buch Seite 4 Mittwoch, 8. November 2006 4:13 16 Starting and StoppingG Maintenance The blade continues to rotate for a few seconds after the machine is switched off. Allow the motor/blade to stop rotating before switching “on” again. Do not rapidly switch off and on. . To aid starting tilt mower to side. Starting: 0 I 2 1 Press and hold the safety button 2. Squeeze the switch lever 1 towards the handle. Release the safety button 2. Stopping: Release the switch lever 1. The mower is fitted with a blade brake. This safety feature stops the blade from rotating in a few seconds. You may notice a slight smell during the first few operations of the brake (on releasing the On/Off switch). This is entirely normal and will cause no damage to your machine. The blade may be stiff to turn by hand while the machine is not in operation, this is due the brake. Mowing I Place the lawnmower on the edge of the lawn, as close to the power point as possible. Work away from the power point. Then at right angles. Position the cable to opposite side (already cut) at the end of each turn. When mowing do not allow the motor to la bour particularly in heavy conditions. When The grass combs 11 allows a very close cut to the wall or edge. Beware of running combs into objects while cutting close to walls/edges. NOTE: The motor is protected by a safety cut out which is activated when the blade becomes jammed or if the motor is overloaded. When this occurs stop, remove the plug from the power supply. The safety cut out will only reset when the switch lever 1 is released. Clear any obstruction and wait for a few minutes for the safety cut out to reset before continuing to use the mower. At this time do not operate the switch lever 1 as this will prolong the reset time of the safety cut out. If the mower cuts out again increase the height of cut to reduce the load on the motor. the motor labours the speed of the motor drops and you will hear a change in the motor do so could damage the machine. switch lever and sound, when this occurs stop mowing, release the H raise the height of cut. Failure to Stop, remove plug from the power supply and remove the grassbox. Note: To ensure long and relia...

Baixe o seu

Para fazer o download, introduza 2 dígitos :