Assessments - 4, GPA: 4.5 ( )

Fabricante : American Power Conversion Arquivo Tamanho: 944.79 kb Arquivo Nome : df22161b-b9de-4170-aa0f-a71aacc03312.pdf Língua de Ensino:

No part of this manual may be reproduced or transmitted in any form without written permission from AC Technology Corporation. The information and technical data in this manual are subject to change without notice. AC Technology Corporation makes no warranty of any kind with respect to this material, including, but not limited to, the implied warranties of its merchantability and fitness for a given purpose. AC Technology Corporation assumes no responsibility for any errors that may appear in this manual. All information given in this documentation has been carefully selected and tested for compliance with the hardware and software described. Nevertheless, discrepancies cannot be ruled out. We do not accept any responsibility nor liability for damages that may occur. Any necessary corrections will be implemented in subsequent editions. This document printed in the United States ENGLISH About these instructions This documentation applies to the SMV frequency inverter, and contains important technical data and describes installation, operation, and commissioning. These instructions are only valid for SMV frequency inverters with software rev 20 (see drive nameplate). Please read the instructions before commissioning. CA B D E F Type: ESV751N04TXB Id-No: 00000000 INPUT: 3 (3/PE) 400/480 V 2.9/2.5 A 50-60 HZ OUTPUT:3 (3/PE) 0 - 400/460 V 2.4/2.1 A 0.75 KW/1HP 0 - 500 HZ For detailed information refer to instruction Manual: SV01 000000000000000000 ESV751N04TXB000XX## ## V0 0 E Hardware Version F Software Version A Certifications C Input Ratings B Type D Output Ratings Scope of delivery • SMV inverter (ESV...) with EPM installed (see Section 4.4) • Operating Instructions Important After receipt of the delivery, check immediately whether the items delivered match the accompanying papers. Lenze/AC Tech not accept any liability for deficiencies claimed subsequently. Claim .• visible transport damage immediately to the forwarder. • visible deficiencies / incompleteness immediately to your Lenze/AC Tech representative. ENGLISH Safety information Safety information General Some parts of Lenze / AC Tech controllers can be electrically live and some surfaces can be hot. Non-authorized removal of the required cover, inappropriate use, and incorrect installation or operation creates the risk of severe injury to personnel or damage to equipment. All operations concerning transport, installation, and commissioning as well as maintenance must be carried out by qualified, skilled personnel who are familiar with the installation, assembly, commissioning, and operation of variable frequency drives and the application for which it is being used. Installation Ensure proper handling and avoid excessive mechanical stress. Do not bend any components and do not change any insulation distances during transport, handling, installation or maintenance. Do not touch any electronic components or contacts. This drive contains electrostatically sensitive components, which can easily be damaged by inappropriate handling. Static control precautions must be adhered to during installation, testing, servicing and repairing of this drive and associated options. Component damage may result if proper procedures are not followed. This drive has been tested by Underwriters Laboratory (UL) and is an approved component in compliance with UL508 Safety Standard. This drive must be installed and configured in accordance with both national and international standards. Local codes and regulations take precedence over recommendations provided in this and other Lenze / AC Tech documentation. The SMVector drive is considered a component for integration into a machine or process. It is neither a machine nor a device ready for use in accordance with European directives (reference machinery directive and electromagnetic compatibility directive). It is the responsibility of the end user to ensure that the machine meets the applicable standards. Electrical connection When working on live drive controllers, applicable national safety regulations must be observed. The electrical installation must be carried out according to the appropriate regulations (e.g. cable cross-sections, fuses, protective earth [PE] connection). While this document does make recommendations in regards to these items, national and local codes must be adhered to. The documentation contains information about installation in compliance with EMC (shielding, grounding, filters and cables). These notes must also be observed for CE-marked controllers. The manufacturer of the system or machine is responsible for compliance with the required limit values demanded by EMC legislation. Application The drive must not be used as a safety device for machines where there is a risk of personal injury or material damage. Emergency Stops, over-speed protection, acceleration and deceleration limits, etc must be made by other devices to ensure operation under all conditions. The drive does feature many protection de...

Baixe o seu

Para fazer o download, introduza 2 dígitos :