Replace them onto the opposite upper leg. Feet Feet Button Button L R 4 SHOWN ACTUAL SIZE Assembly 4 Lower Leg •Position a lower leg so that it stands on a flat surface, as shown. •Fit a foot onto the end of the lower leg. • Insert a #8 x 1/2" screw through the bottom of the foot and into the lower leg. Tighten the screw with a Phillips screwdriver. Do not over-tighten. •Repeat this procedure to assemble the other foot to the other lower leg. IMPORTANT! Before each use or assembly, inspect this

CradleCradle (Seat moves side to side) SwingSwing (Seat moves front to back) WARNING CAUTION To prevent serious injury and/or falls and being strangled in the restraint system: • Always use restraint system. Never rely on the tray to restrain child. • Not recommended for children who can sit up by themselves (6 months approximately, until 9 kg/20 lbs). • Never leave child unattended. • It is dangerous to use this product on an elevated surface. This product contains small parts in its unassemble

-Not recommended for children who can sit up by themselves (6 months approximately, until 9 kg, 20 lbs). • Never leave child unattended. • It is dangerous to use this product on an elevated surface. 11 Set-Up & Use • Place your child in the seat. Position the crotch belt between your child’s legs. • Fasten the waist belts to the crotch belt.Make sure you hear a “click” on both sides. • Check to be sure the restraint system is securely attached by pulling it away from your child.The restraint sys

DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts. Securing Your Child •Place your child in the seat. Position the crotch belt between your child’s legs. •Fasten both waist belts to each side of the crotch belt. Make sure you hear a “click” on both sides. •Check to be sure the restraint system is securely attached by pulling it away from your child. The restraint system should remain attached. 12 Crotch B

Please read these instructions before use of this product. Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included). Requires four LR20 ("D") alkaline batteries (not included) for operation. WARNING To prevent serious injury or death from falls and being strangled in the restraint system: • Always use the restraint system. Never rely on the tray to restrain child. • Never use with an active child who may be able to climb out of the seat. • Not recommended for chi

• While pressing the button on the other end of the base tube, insert it into the short tube on the other frame tube. • Push the base tube until it “clicks” into place. Hint: You may need the help of another adult to hold the frame tubes while you assemble the base tube to them. 3 3 Assembly Frame Upper Frame Tube Upper Frame Tube 4 Front Tube • Pull the front tube to be sure it is secure to each lower frame tube. 6 • Check to be sure the upper frame tubes are secure in the frame. If you can rem