Processor Option
Kit contents
•
Processor with installation tool
Installation Instructions
•
Heatsink
•
This document
for HP ProLiant BL460c Server Blades



Installing a processor

WARNING: To reduce the risk of personal

injury from hot surfaces, allow the drives

and the internal system components to cool
before touching them.


CAUTION: To avoid damage to the system board:
•
Do not touch the socket contacts.

•
Always install the processor socket cover after

removing the processor from the socket.

•
Do not tilt or slide the processor when lowering

the processor into the socket.

CAUTION: To avoid damage to the processor:

•
Handle the processor only by the edges.
•
Do not touch the bottom of the processor,
especially the contact area.
CAUTION: To prevent possible server malfunction


and damage to the equipment, multiprocessor

configurations must contain processors with the

same part number.

CAUTION: To prevent possible server blade

overheating, always populate processor socket 2

with a processor and a heatsink or a processor

cover and a heatsink blank.

CAUTION: The heatsink thermal interface media is

not reusable and must be replaced if the heatsink is

removed from the processor after it has been
installed.


IMPORTANT: When installing the heatsink, align

the guide pins on the processor retention bracket
with the alignment holes in the heatsink.

© Copyright 2006 Hewlett-Packard Development Company, L.P.
IMPORTANT: Processor socket 1 must always be
The information contained herein is subject to change without notice. The
populated. If processor socket 1 is empty, the server
only warranties for HP products and services are set forth in the express
blade does not power up.
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
NOTE: Do not discard the processor protective
not be liable for technical or editorial errors or omissions contained herein.
cover. Always install the processor protective cover

if the processor is removed from the socket.
May 2006 (First Edition)

1. Power down the server blade.
Part Number 410958-001
2. Remove the server blade.



3. Remove the access panel.
4. Remove all hard drives and hard drive blanks.

---

...

Este manual também é adequado para os modelos :
Computadores - HP ProLiant xw460c Blade Workstation (545.55 kb)