Assessments - 1, GPA: 3 ( )

Fabricante : Panasonic Arquivo Tamanho: 2.26 mb Arquivo Nome : Língua de Ensino:

• Do not touch the aluminium fi n, sharp parts may cause injury. CLEANING INSTRUCTIONS HINT • Do not use benzene, thinner or scouring powder. • Use only soap ( pH7) or neutral household detergent. • Do not use water hotter than 40°C. • To ensure optimal performance of the unit, cleaning maintenance has to be carried out at regular intervals. Please consult authorized dealer. 5 HUMAN ACTIVITY SENSOR • Do not hit or violently press the sensor or poke it with a sharp object. This can lead to damage and malfunction. • Do not place large objects near the sensor and keep away heating units or humidifi ers from the sensor’s detection area. This may lead to sensor malfunction. POWER TIMER ECONAVI AUTO COMFORT NANOE-G POWERFUL/QUIET 2 8 4 1 9 5 6 7 3 10 nanoe-G GENERATOR • Do not touch during operation. 1 INDOOR UNIT • Wipe the unit gently with a soft, dry cloth. 2 FRONT PANEL Remove Front Panel • Raise and pull to remove the front panel. • Wash gently and dry. Close Front Panel • Press down both ends of the front panel to close it securely. 3 REMOTE CONTROL RECEIVER 4 ALUMINIUM FIN 5 HUMAN ACTIVITY SENSOR 6 HORIZONTAL AIRFLOW DIRECTION LOUVER • Manually adjustable. 7 VERTICAL AIRFLOW DIRECTION LOUVER • Do not adjust by hand. 8 AUTO OFF/ON BUTTON • Use when remote control is misplaced or a malfunction occurs. Action Mode Press once. Auto Press and hold until 1 beep is heard, then release. Cooling Press the button to turn off. 9 AIR FILTERS • Air fi lter cleaning is required every two weeks. • Wash/rinse the fi lters gently with water to avoid damage to the fi lter surface. • Dry the fi lters thoroughly under shade, away from fi re or direct sunlight. • Replace any damaged fi lters. 10 nanoe-G GENERATOR Clean with dry cotton bud. • nanoe-G generator cleaning is recommended every 6 months. TROUBLESHOOTING he following symptoms do not indicate malfunction. T TThe following symptoms do not indicate malfunction. Check the following before calling for servicing. Check the following before calling for servicing. SYMPTOMSYMPTOM CAUSECAUSE Mist emerges from indoor unit. >• Condensation effect due to cooling process. Water flowing sound during operation. >• Refrigerant flow inside the unit. The room has a peculiar odor. >• This may be due to damp smell emitted by the wall, carpet, furniture or clothing. Indoor fan stops occasionally during automatic fan speed >• This helps to remove the surrounding odours. setting. Operation is delayed a few minutes after restarting. >• The delay is a protection to the unit’s compressor. Outdoor unit emits water/steam. >• Condensation or evaporation occurs on pipes. TIMER indicator is always on. >• The timer setting repeats daily once set. POWER indicator blinks during operation and the indoor >• The unit is in defrost mode, and the melted frost is fan is stopped. drained from the outdoor unit. Indoor fan stops occasionally during heating operation. >• To avoid unintended cooling effect. Cracking sound during operation. >• Changes of temperature caused the expansion/ contraction of the unit. SYMPTOMSYMPTOM CHECKCHECK Heating/Cooling operation is not working efficiently. > • Set the temperature correctly. • Close all doors and windows. • Clean or replace the filters. • Clear any obstruction at the air inlet and air outlet vents. Noisy during operation. > • Check if the unit has been installed at an incline. • Close the front panel properly. Remote control does not work. > • Insert the batteries correctly. (Display is dim or transmission signal is weak.) • Replace weak batteries. The unit does not work. > • Check if the circuit breaker is tripped. • Check if timers have been set. The unit does not receive the signal from the remote > • Make sure the receiver is not obstructed. control. • Certain fluorescent lights may interfere with signaltransmitter. Please consult authorized dealer. INFORMATION FOR SEASONAL INSPECTION AFTER EXTENDED NON SERVICEABLE CRITERIAS NON-USE TURN OFF POWER SUPPLY AND UNPLUG then • Checking of remote control batteries. please consult authorized dealer under the following • No obstruction at air inlet and air outlet vents. conditions: • After 15 minutes of operation, it is normal to have the • Abnormal noise during operation. following temperature difference between air inlet and air • Water/foreign particles have entered the remote outlet vents: control. Cooling: . 8°C Heating: . 14°C • Water leaks from Indoor unit. • Circuit breaker switches off frequently. FOR EXTENDED NON-USE • Power cord becomes unnaturally warm. • Switches or buttons are not functioning properly. • Activate Heat mode for 2~3 hours as an alternative to remove moisture left in the internal parts thoroughly toprevent mould growth. • Turn off the power supply and unplug. • Remove the remote control batteries. Information for Users on Collection and Disposal of Old Equipment and used Batteries [Information on Disposal in other Countries Note for the battery symbol (bottom two outside the European Union...

Baixe o seu

Para fazer o download, introduza 2 dígitos :