Assessments - 3, GPA: 4.3 ( )

Fabricante : Panasonic Arquivo Tamanho: 2.26 mb Arquivo Nome : Língua de Ensino:

• Operating the unit within the recommended temperaturecould induce energy saving. HEAT mode : 20°C ~ 24°C. COOL mode : 26°C ~ 28°C. DRY mode : 1°C ~ 2°C lower than room temperature. TO SELECT OPERATION MODE AUTO mode - For your convenience 3 • Unit selects the operation mode according to the room temperature. • Once auto mode is selected, the unit will operate at thestandard setting temperature. Room temperature Operation mode Standard setting temperature 23°C & above Cool 25°C Below 23°C Dry 22°C Below 20°C Heat 21°C • Press for “HI” to +2°C or for “LO” to -2°C to the standard setting temperature. HEAT mode - To enjoy warm air • Unit takes a while to warm up. The power indicator blinks during this operation. COOL mode - To enjoy cool air • Use curtains to screen off sunlight and outdoor heat to reduce power consumption during cool mode. DRY mode - To dehumidify the environment • Unit operates at low fan speed to give a gentle coolingoperation. TO SELECT FAN SPEED (3 OPTIONS) 4 FAN SPEED • For AUTO, the indoor fan speed is automatically adjusted according to the operation mode. A.COMFORT ECONAVI A.COMFORTECONAVI NORMAL A.COMFORTECONAVI NORMAL TO ADJUST VERTICAL AIRFLOW DIRECTION (5 OPTIONS) ENGLISH8 TO MONITOR HUMAN PRESENCE & ACTIVITY FOR ENERGY SAVING & COMFORT AIR SWING • Keeps the room ventilated. To optimize energy ECONAVI ECONAVI • In COOL/DRY mode, if AUTO is set, the louver swing saving up/down automatically. • In HEAT mode, if AUTO is set, the louver fi x at A.COMFORT To maximize comfort AUTO COMFORT predetermined position. 6 TO PURIFY THE AIR NANOE-G • Removes/deactivates harmful micro-organisms such asviruses, bacteria, etc. • Can be activated even when the unit is turned off. In this condition, fan speed and air swing cannot be adjusted. • nanoe-G starts automatically with the unit switched on OFF/ON with . 7 TO SWITCH BETWEEN POWERFUL & QUIET POWERFUL/POWERFUL QUIET NORMAL QUIET POWERFUL TO REACH TEMPERATURE POWERFUL QUICKLY Heat Source & Movement NormalHighLowNoneSet Fan Speed . Medium Fan +1 tap* +2°C -1°C +1 tap +0.3°CCOOL/DRY ModeSet Temperature HEAT Mode +0.3°C Set Temperature Set Fan Speed * For first 15 minutes or until set temperature is reached. -2°C -1°C • The human activity sensor may not detect moving objectsfurther than 7m away or beyond detection angle. • The human activity sensor sensitivity is infl uenced by indoor unit location, movement speed, temperature range, etc. • This operation will stop automatically after 20 • The human activity sensor may mistakenly detect pets, minutes. certain lighting, fluttering curtains and light refl ection as QUIET TO ENJOY QUIET QUIET human being. OPERATION • This operation reduces airfl ow noises. 7 NOTESNOTES NANOE-G , POWERFUL/ QUIET , ECONAVI / A.COMFORT POWERFUL/ QUIET , ECONAVI / A.COMFORT • Can be activated in all modes and can be cancelled by pressing the respective button again. • Cannot be selected at the same time. REMOTE CONTROL 9 Press and hold for 5 seconds to dim or restore the unit’s indicator brightness. 10 Press and hold for approximately 10 seconds toshow temperature setting in °C or °F. 11 Press to restore the remote control’s default setting. 12 Not used in normal operations. TIMER SET CANCEL ON OFF 1 2 3 SET CLOCK RESET 9 10 1112 TOSET THE TIMERTO SET THE TIMER • To turn ON or OFF the unit at a preset time. ON OFF 1 2 TIMER SET Select ON or OFF timer Set the time Confirm • To cancel ON or OFF timer, press ON or OFF then press CANCEL. • When ON Timer is set, the unit may start earlier (up to 30 minutes) before the actual set time in order to achieve the desired temperature on time. • Timer operation is based on the clock set in the remote control and repeats daily once set. For clock setting, please refer to Remote Control Preparation on the back cover. • If timer is cancelled manually or due to power failure, you can restore the previous setting (once power is resumed) by pressing SET . ENGLISH 9 INDOOR UNIT CAUTION • Switch off the power supply and unplug before cleaning. • Do not touch the aluminium fi n, sharp parts may cause injury. CLEANING INSTRUCTIONS HINT • Do not use benzene, thinner or scouring powder. • Use only soap ( pH7) or neutral household detergent. • Do not use water hotter than 40°C. • To ensure optimal performance of the unit, cleaning maintenance has to be carried out at regular intervals. Please consult authorized dealer. 5 HUMAN ACTIVITY SENSOR • Do not hit or violently press the sensor or poke it with a sharp object. This can lead to damage and malfunction. • Do not place large objects near the sensor and keep away heating units or humidifi ers from the sensor’s detection area. This may lead to sensor malfunction. POWER TIMER ECONAVI AUTO COMFORT NANOE-G POWERFUL/QUIET 2 8 4 1 9 5 6 7 3 10 nanoe-G GENERATOR • Do not touch during operation. 1 INDOOR UNIT • Wipe the unit gently with a soft, dry cloth. 2 FRONT PANEL Remove Front Panel • Raise and pull to remove the front panel. • Wash gently and dry....

Baixe o seu

Para fazer o download, introduza 2 dígitos :