YOUR FEEDBACK IS VITAL TOTHE SUCCESS OF DEWALT'S QUALITY IMPROVEMENT PROGRAM. See our catalog on the World Wide Web at INSTRUCTIVO DE OPERACION, CENTROS DE INSTRUCTION MANUAL SERVICIO Y POLIZA DE GARANTIA. ADVERTENCIA: GUIDE D'UTILISATION LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. SI TIENE DUDAS, POR FAVOR LLAME. MANUAL DE INSTRUCCIONES DW746, DW746X Woodworker’s Table Saw Scies circulaires a table d’entrepreneur Sierra de banco para madera Definitions: Safety Guidelines The definitions b

1-800-4-DEWALT • INSTRUCTIVO DE OPERACION, CENTROS DE SERVICIO Y POLIZA INSTRUCTION MANUAL DE GARANTIA. ADVERTENCIA: LEASE ESTE INSTRUCTIVOANTES DE USAR EL PRODUCTO. GUIDE D'UTILISATIONMANUAL DE INSTRUCCIONES DW861W Heavy-Duty 4-1/2" (114 mm) Wet/Dry Masonry SawDW861W scie a maconnerie a sec/a l’eau de 114 mm (4-1/2 po) a service intensifSierra industrial de 114 mm (4-1/2 pulg.) de corte humedo o seco para mamposteria DW861W DEWALT Industrial Tool Co., 701 Joppa Road, Baltimore, MD 21286 (MAR05)

Worn blades may also have insufficient body clearance which increases the chance of binding and increased loading. 6. LIFTING THE SAW WHEN MAKING BEVEL CUTS Bevel cuts require special operator attention to proper cutting techniques - especially guidance of the saw. Both blade angle to the shoe and greater blade surface in the material increase the chance for binding and misalignment (twist) to occur. 7. RESTARTING A CUT WITH THE BLADE TEETH JAMMED AGAINST THE MATERIAL The saw should be brought u

• Keep hands away from moving parts. Never place your hands near the cutting area. • Keep hands away from cutting area. When sawing, never reach underneath or behind the material being cut for any reason. • Never hold work in your hand, lap or against parts of your body when sawing. The saw my slip and the blade could contact the body causing injury. • Use extra caution when cutting overhead and pay particular attention to overhead wires which may be hidden from view. Anticipate the path of fall

Lower vise lever then tighten vise on work by using crank (see Figure 5). 30 15 FIG. 3 WRENCH FENCE FENCE BOLTS VISE 30 15 15 0 45 30 FIG. 4 383823-01/DW870 5/3/02 1:33 PM Page 7 383823-01/DW870 5/3/02 1:33 PM Page 8 English To Adjust Vise Stop CUTTING ANGLE Use the wrench to loosen the two hex bolts (Fig. 3). (Do not remove the bolts). The fence can be rotated in either direction. Securely tighten both the bolts before use. Switch To start the tool, FIG. 5 depress the trigger switch shown in Fi

B Copyright © 2006, 2008 Delta Machinery TABLE OF CONTENTS TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS....................2 SAFETY gUIdELINES - dEFINITIONS.....................3 gENERAL SAFETY RULES .......................................4 AddITIONAL SPECIFIC SAFETY RULES ................5 FUNCTIONAL dESCRIPTION ...................................7 CARTON CONTENTS ...............................................7 ASSEMBLY .................................................................10 OPE

For Parts, Service, Warranty or other Assistance, please call 1-888-848-5175 (In Canada call 1-800-463-3582). 10" Compound Power Miter Saw (Model 36-075) PART NO. 899908-0010 Copyright © 2000 Delta Machinery ESPANOL: PAGINA 21 To learn more about DELTA MACHINERY visit our website at: For Parts, Service, Warranty or other Assistance, please call 1-888-848-5175 (In Canada call 1-800-463-3582). SAFETY RULES Woodworking can be dangerous if safe and proper operating procedures are not followed. As wi

392261-00 DW7464 Copyright © 2002 Before returning this product call 1-800-4-DEWALT IF YOU SHOULD EXPERIENCE A PROBLEM WITH YOUR DEWALT PURCHASE, CALL 1-800-4 DEWALT. IN MOST CASES, A DEWALT REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US A CALL. YOUR FEEDBACK IS VITAL TOTHE SUCCESS OF DEWALT'S QUALITY IMPROVEMENT PROGRAM. See our catalog on the World Wide Web. INSTRUCTIVO DE OPERACION, CENTROS DE SERVICIO Y POLIZA INSTRUCTION MANUAL DE GARANT

Orbital action provides a faster cut, but with a less smooth cut across the material. In orbital action, the blade moves forward during the cutting stroke in addition to the up and down motion. NOTE: Metal or hardwoods should never be cut in orbital action. To adjust the cutting action, move the cutting action lever (H) between the four cutting positions: 0, 1, 2, and 3. Position 0 is straight cutting. Positions 1, 2, and 3 are orbital cutting. The aggressiveness of the cut increase as the lever

For all refurbished delta product, the warranty period is 180 days. delta may require that electric motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or replacement. delta will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone other than an authorized delta service facility or representative. Under no circumstances will delta be liable for