Only turn laser beam on when tool is on workpiece. 1. Mark the line of the cut on the workpiece. 2. Adjust the depth of cut and bevel angle as required. 3. Rest the front edge of the base on the workpiece. 4. Switch on the laser beam using the laser light on/off button (2). 5. Align the beam with the line on the workpiece. 6. Start the motor by depressing the lock-off button (5) and squeezing the trigger switch (4). 7. Always let the blade reach full speed (approximately 2 seconds) before you be

A Copyright © 2005 Delta Machinery INSTRUCTION To learn more about DELTA MACHINERY visit our website at: For Parts, Service, Warranty or other Assistance, please call 1-800-223-7278 (In Canada call 1-800-463-3582). TABLE OF CONTENTS TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SAFETY GUIDELINES - DEFINITIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Push the on/off switch (2) forward and up over the latching ramp to lock the switch on (fig C). To turn off the tool, press the back of the switch and lift it over the latching ramp (fig D). CAUTION. Allow the blade to come to a complete standstill before setting the jigsaw down. Blade guard The blade guard (6) should always be in position when operating the jigsaw. It can be removed to allow easier access when changing blades (fig E). Blade guide The grooved disc blade guide (7) is spring loade

We recommend that you always wear a dust mask when operating this saw. • Wear gloves when handling saw blades and rough materials. • Saw blades shall be carried in a holder wherever possible. • Select saw blades in relation to the material being cut. • Use correctly sharpened saw blades and observe the maximum speed marked on the blade. • Take additional care when trenching (slotting). • The mitre saw can be safely carried by the carrying handle but only once it has been removed from the mains p

Maintenance WARNING. Always ensure that the tool is switched off and the plug is removed from the power point before making and adjustments or maintenance procedures. When you have finished cutting your tiles, always disconnect the power, empty the water and fully clean and dry the machine. Installing a blade DANGER. • Never try to use a blade larger than the stated capacity of the saw. It will come into contact with the blade guard. • Never use a blade that is too thick to allow the outer blade

General safety instructions 4 This product is warranted for a 2-year period for home Additional safety rules for band saws Unpacking Know your product Components Assembly 5 6 6 8 8 domestic use from the date of the original purchase. If found to be defective in materials or workmanship, the tool or the offending faulty component will be repaired or replaced free of charge with another of the same item. A small freight charge may apply. Proof of purchase is essential. We reserve the right to reje

INSTRUCTION MANUAL 2000W 250mm (10”) Table Saw with Laser Line Generator* * Patent Pending LS250TS 061004 ED8 DCR • Melbourne • Perth • Auckland • Hong Kong • Shanghai • Taipei • New York • Verona • London • Paris 2 Contents ...................................................................................................................................................................................................................................................................................

Power tools create sparks which may ignite the dust or fumes. • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. Electrical safety • Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. • Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and re

1200W VARIABLE SPEED SCROLL SAW WITH REDEYE ® LS1620 INSTRUCTION MANUAL BlackCyanMagentaYellowCode: LS1620Date: 060906Edition: 05Op: BRBlackCyanMagentaYellowCode: LS1620Date: 060906Edition: 05Op: BR ContentsContents Introduction 3 Environmental protection 3 Description of symbols 3 Specifications 3 Safety rules for laser lights 4 General safety instructions 4 Additional safety rules for scroll saws 5 Accessories 6 Unpacking 6 Assembly 6 Know your product 7 Mounting the saw to a workbench 8 Blade

Upper blade guide assembly 17. Upper guide assembly lock knob 18. Dust extraction port (not shown) 19. Upper blade guide 20. Upper blade support head (not shown) 21. Lower blade support head (inside wheel housing) 22. Table 23. Lamp 24. Protractor 7 5 2 6 3 23 11 16 17 19 22 12 13 14 4 21 24 8 9 1 10 Setting up Electrical installation WARNING. The band saw is equipped with a 230 – 240V ~ single phase 200W motor. It must be connected to an earthed socket and it is recommended that a residual curr