Your Humminbird® is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird® does require repairs, we offer an exclusive Service Policy -free of charge during the first two years after purchase, and available at a reasonable rate after the two-year period. For complete details, see the Warranty section included in this manual. We encourage you to read this installation and operations manual carefully in order to get full benefit from all

Dense, large objects such as fish, thick vegetation, or hard bottom, are usually displayed as thick or thin red lines on the Flasher Dial. In Palette 1, Red indicates a strong sonar return signal. Yellow Medium Signal Small objects such as fish, sparse vegetation, or soft bottom (sand or mud) are usually displayed as yellow lines on the Flasher Dial. In Palette 1, Yellow indicates a medium sonar return signal. Green Weak Signal Light objects such as your jig, bait fish, sparse vegetation, and so

1. Connect the transducer to the control head. The slots are keyed to prevent reverse installation, so be careful not to force the connector into the holder. 2. Drop the transducer into the ice hole. If the transducer is working properly, you will see the bottom displayed on the Flasher Dial as a red line. WARNING: Before walking onto the ice, make sure that conditions are safe. 2. Assembling the Transducer and Float In this procedure you will assemble the transducer and float. Float Attaching t

Before the AS WX1 Satellite Weather Receiver can be used on the water, the subscription must be activated on your Humminbird® control head. To activate XM WX Satellite Weather®: 1. The XM Radio ID is required to set up the XM WX subscription. 1 a. Use a Y-Cable to connect a GPS and the AS WX 1 Satellite Weather Receiver to your Humminbird® control head. The slots are keyed to prevent reversed installation, so be careful not to force the connectors into the slots. 1 b. Power on the control