Log:
Assessments - 4, GPA: 3.8 ( )

Instruções de Operação Dolmar, Modelo PS-344

Fabricante : Dolmar
Arquivo Tamanho: 3.24 mb
Arquivo Nome :
Língua de Ensino: enesfr
Ir para baixar



Facilidade de uso


• As an example to keep the oil gauge clean, it is recommended to insert the oil gauge on its knob side into the engine cover. Point 1 in Replacement of Oil “Oil Gauge” Shelf Shelf • It becomes cause of the oil soiling. Be sure to wipe out spilt oil before start of operation. Point 2 in Replacement of Oil: “If oil spills out” 9 2. Fuel supply WARNING • • When supplying the fuel, be sure to observe the following instructions to prevent ignition or fire: - Fuel supply must be made in a place free of fire. Never bring the fire (smoking, etc.) near to the place of fuel supply. - Stop the engine and allow the engine to cool down before fuel supply. - Open the fuel tank cap full of fuel slowly. The fuel may sprout out under internal pressure. - Take care not to spill the fuel. Any spilled fuel must be wiped clean. - Carry out fuel supply in a well-ventilated place. Handle the fuel with care. - Fuel sticking to the skin or entering an eye may cause allergies or irritation. When any physical abnormality is detected, consult the medical specialist immediately. STORAGE PERIOD OF FUEL Fuel should be used up within a period of 4 weeks, even if it is kept in a special container in a well-ventilated shade. If a special container is not used or if the container is not covered, fuel may deteriorate in one day. • Keep the machine and tank at a cool place free from direct sunshine. • Never keep the fuel in the cabin or trunk. Storage of machine and refill tank FUEL The engine is a four-stroke engine. Be sure to use an automobile gasoline (regular gasoline or premium gasoline). • Never use a gasoline mixture which contains engine oil. Otherwise, it will cause excessive carbon accumulation or mechanical troubles. • Use of deteriorated oil will cause irregular startup. Points for Fuel When refueling the fuel, be sure to stop the engine and confirm that the engine cools down. REFUELING METHOD • Loosen the tank cap a little so that there will be no difference in atmospheric pressure. • Detach the tank cap, and refuel, discharging air by tilting the fuel tank so that the refuel port will be oriented upward. (Never refill fuel full to the oil refill port.) • After refueling, securely tighten the tank cap. • If there is any flaw or damage on the tank cap, replace it. • The tank cap is consumable, and therefore should be renewed every two to three years. 10 OPERATION 1. Starting WARNING • • • • Never attempt engine start in a place where the fuel has been supplied. When starting the engine, keep a distance of at least 3 m. - Otherwise, it will may cause ignition or fire. Exhaust gas from the engine has toxic consequences. Do not operate the engine in a poorly-ventilated place, such as in a tunnel, building, etc. - Operating the engine in the poorly-ventilated place may cause poisoning by exhaust gas. In case of detection of any abnormality in sound, odor, vibration after start, stop the engine immediately and carry out inspection. - If the engine is operated without attend...

Este manual também é adequado para os modelos :
Clippers - PS-410 (3.24 mb)
Clippers - PB-250.4 (3.24 mb)
Clippers - PB-500 R (3.24 mb)
Clippers - PS-33 (3.24 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias