Assessments - 3, GPA: 4.7
(
)
)
|
Fotos e especificações Dolmar PS-460 |
Facilidade de uso
Inspection and Refill of Engine Oil (1) Perform the following procedure, with the engine cooled down. • Inspection: Please inspect whether it makes the machine horizontal, removes the oil cap, there is a oil to inside the range of the upper limit lower limit mark of gauge. When it is insufficient, (especially, when it has not reached to the lower limit level), please refill new oil. • Refill: Verticality (under the suction port cover) please do the machine, remove the oil cap. When oil is supplied from the oil pipe port and oil level comes to the shelf inside the oil pipe, please stop oil supply. (2) For reference, the oil refill time is about 10 h (refill frequency: 10 times). (3) If the oil changes in color or mixes with dirt, replace it with new one. (For the interval and method of replacement, refer to P. 14) Recommended oil: SAE 10W-30 oil of API Classification, Class SF or higher (4-stroke engine for automobile) Oil volume: Approx. 0.08 L (2.7 fl.oz) Inspection method of engine oil Upper limit Lower limit Upper limit Lower limit NOTE • • If the engine is not kept upright, oil may go into around the engine, and may be refilled excessively. If the oil is filled above the limit, the oil may be contaminated or may catch fire with white smoke. • Remove dust or dirt near the oil refill port, and detach the oil gauge. • Keep the detached oil gauge free of sand or dust. Otherwise, any sand or dust adhering to the oil gauge may cause irregular oil circulation or wear on the engine parts, which will result in troubles. • As an example to keep the oil gauge clean, it is recommended to insert the oil gauge on its knob side into the engine cover. Point 1 in Replacement of Oil “Oil Gauge” Shelf Shelf • It becomes cause of the oil soiling. Be sure to wipe out spilt oil before start of operation. Point 2 in Replacement of Oil: “If oil spills out” 9 2. Fuel supply WARNING • • When supplying the fuel, be sure to observe the following instructions to prevent ignition or fire: - Fuel supply must be made in a place free of fire. Never bring the fire (smoking, etc.) near to the place of fuel supply. - Stop the engine and allow the engine to cool down before fuel supply. - Open the fuel tank cap full of fuel slowly. The fuel may sprout out under internal pressure. - Take care not to spill the fuel. Any spilled fuel must be wiped clean. - Carry out fuel supply in a well-ventilated place. Handle the fuel with care. - Fuel sticking to the skin or entering an eye may cause allergies or irritation. When any physical abnormality is detected, consult the medical specialist immediately. STORAGE PERIOD OF FUEL Fuel should be used up within a period of 4 weeks, even if it is kept in a special container in a well-ventilated shade. If a special container is not used or if the container is not covered, fuel may deteriorate in one day. • Keep the machine and tank at a cool place free from direct sunshine. • Never keep the fuel in the cabin or trunk. Storage of machine and refi...
Este manual também é adequado para os modelos :Clippers - PS-410 (3.24 mb)
Clippers - PB-250.4 (3.24 mb)
Clippers - PB-500 R (3.24 mb)
Clippers - PS-33 (3.24 mb)