Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
(Press the [MONITOR A/B] button so that the lamp is off.) 6 Use the MIXER/LAYER buttons on the 01X to select the appropriate mLAN output group. Press the [INST] (9-16; mL1-8) button to select mLAN channels 9 - 16, and press [MIDI] (17-24; mL9-16) button to select mLAN channels 17 - 24. 7 Use the appropriate faders to set the levels. The mLAN outputs from the DAW/computer are now routed to the input channels of the 01X (channels 9 - 24), and can be processed and mixed along with channels 1 - 8. • When inputting stereo signals, use odd/even input channels in stereo pair configuration (for example, 9 and 10). (See page 102.) Appendix Reference Getting Basics 01X Owner’s Manual (Supplementary Manual) 71 Recording/Playback/Remote Control Recording/Playback/Remote Control Getting Started Reference Appendix . Recording audio In this section, you’ll learn how to record an audio input signal from the 01X to the computer. 1 Connect the instrument or microphone to the 01X and set the level(s). Make sure the 01X is set to Internal mode (press the [INTERNAL] button so that it lights). Also, set the [MONITOR A/B] switch to monitor the 01X sound. (In the default condition, the button lamp should be off.) 2 From the Devices menu, select “VST Connections.” (Or press F4, the default shortcut.) Set the Input configuration as desired. (Here, we’ll use the same “8 mono in” configuration we used on page 70.) 3 Set up Cubase SX 3 for recording an audio track. Use an existing audio track in the song or create a new audio track if necessary. 4 Click on the newly created track in the Project window, and call up the Inspector window for the track (shortcut: Alt + I). 5 Enable the desired input for the track. Click at the track name at the top of the Inspector window to call up the track parameters (as shown below), then click in the Input Routing box and select the desired input bus from the pull-down menu. Also, set the desired output bus. If you are using the same output scheme as the simple one described on page 70, set this (or keep it set) to Bus 1. 6 Select the track to be recorded and record as usual from Cubase SX 3. After recording, play back the song/track. If you’ve made the proper setting in step 5 above, you should be able to hear the new track without having to change the Monitor setting for the track. 01X Owner’s Manual (Supplementary Manual) Recording/Playback/Remote Control Recording/Playback/Remote Control q Make sure your computer is on and the mLAN driver is active. Refer to the explanation in the separate Installation Guide. w Press the [UTILITY] button. e Press knob 1 to select the REMOTE SELECT page. r Select the appropriate sequencer. Since we’ll be using Cubase SX 3 throughout these examples, press knob 3 (CUBASE/NUENDO). If you are using another sequencer, press the appropriate knob. t Press knob 8 (YES) to actually change the setting. Enable the Remote mode and start up your sequencer q Enable the Remote mode. Press the [REMOTE] button. The 01X is set to standby. REMOTE MODE (CUBASE/NUENDO) For details on how to start up each DAW application for Remote Control, see the separate Installation Guide. w Start your sequencer program. Once your sequencer is up and running and a song has been loaded, the 01X reads the data of the song (track names, level/pan settings, etc.) and reconfigures the entire mixer accordingly. This means that the faders may move into position and the track names (up to six characters) appear in the display. Working in the Project window In Cubase SX 3, make sure the Project window is on top. This is the main working area in the sequencer and shows all tracks from top to bottom. You can call this up from the 01X by holding [SHIFT] and pressing [TRACK (F1)]. Notice that the names of the first eight tracks appear in the display. If there are more than eight tracks in your song, use the BANK [] (Left/Right) buttons to call up and display the other tracks (in banks of eight). Pan Pan Left-Right Page:01/02 FullKi DrumLo Bass Guitar String Bass Percus Cello Appendix Reference Getting Basics Pan Pan Left-Right Page:01/02 FullKi DrumLo Bass Guitar String Bass Percus Cello 01X Owner’s Manual (Supplementary Manual) 73 Recording/Playback/Remote Control Recording/Playback/Remote Control Getting Started Reference Appendix Using the transport controls These buttons let you control Cubase SX 3 in the same way as using a tape recorder. Rewind Fast-forward Stop Play Record Dial This is like a jog/shuttle wheel on a video deck, and gives you an even faster way to move the song position in the window. No matter what window is active, you can use these to control song playback/recording and navigate through the song. Also keep in mind that all of your computer shortcut keys are active if you want to use them— even while using the 01X as a remote control. Using markers Hold down [MARKER] and use the [r] (rewind)/[f] (fast-forward) buttons. If you’ve set up markers in the song, these can be used to jump amo...