Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
If instructions for enclosed installations are not provided, it must be assumed that unobstructed ventilation is required. 7. Temperature considerations: Electronic products should be installed in locations that do not seriously contribute to their operating temperature. Placement of this product close to heat sources such as; radiators, heat registers etc., should be avoided. 8. This product was NOT designed for use in wet/damp locations and should not be used near water or exposed to rain. Examples of wet /damp locations are; near a swimming pool, spa, tub, sink, or wet basement. 9. This product should be used only with the components supplied or; a cart ,rack, or stand that is recommended by the manufacturer. If a cart, rack, or stand is used, please observe all safety markings and instructions that accompany the accessory product. 10. The power supply cord (plug) should be disconnected from the outlet when electronic products are to be left unused for extended periods of time. Cords should also be disconnected when there is a high probability of lightening and/or electrical storm activity. 11. Care should be taken that objects do not fall and liquids are not spilled into the enclosure through any openings that may exist. 12. Electrical/electronic products should be serviced by a qualified service person when: a. The power supply cord has been damaged; or b. Objects have fallen, been inserted, or liquids have been spilled into the enclosure through openings; or c. The product has been exposed to rain; or d. The product does not operate, exhibits a marked change in performance; or e. The product has been dropped, or the enclosure of the product has been damaged. 13. This product, either alone or in combination with an amplifier and headphones or speaker/s, may be capable of producing sound levels that could cause permanent hearing loss. DO NOT operate for a long period of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist. IMPORTANT: The louder the sound, the shorter the time period before damage occurs. 14. Some Yamaha products may have benches and/or accessory mounting fixtures that are either supplied as a part of the product or as optional accessories. Some of these items are designed to be dealer assembled or installed. Please make sure that benches are stable and any optional fixtures (where applicable) are well secured BEFORE using. Benches supplied by Yamaha are designed for seating only. No other uses are recommended. INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK, AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST. IMPORTANT SAFETY INSTRUCTIONS 92-469-3 PLEASE KEEP THIS MANUAL The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. The lightning flash with arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock. Rated Output Power : 7 W Speaker : 16 cm x1 Controls : VOLUME, TREBLE, BASS, DRIVE switch Input/Output Terminals : INPUT, PHONES Control Panel Specifications q INPUT Connect your bass guitar to this jack. w DRIVE (DRIVE Switch) Depress the switch (>) to engage the drive mode which boosts the gain to add powerful distortion to the sound. When the switch is in the raised position (?), the sound produced by the amplifier is clear, not distorted. e VOLUME This knob controls the volume level of the amplifier. * No sound is produced when the VOLUME knob is set to its “0” position. Handle the unit carefully — never apply excessive force to the controls and avoid dropping the unit. For safety, always remove the power plug from the AC wall outlet if there is any danger of lightning striking in your area. To prevent damage and possibly electrical shock, never open the case and tamper with the internal circuitry. Never use solvents such as benzene or thinner to clean the BA-10. Wipe clean with a soft, dry cloth. r TREBLE This knob controls the level of the amplifier’s high frequencies. t BASS This knob controls the level of the amplifier’s low frequencies. y PHONES Connect a pair of headphones to this jack. * The speaker will produce no sound when a pair of headphones is connected to this jack. u POWER This is the amplifier’s power switch. When the power is ON, the indicator to the left of the switch lights. Power Requirements : U.S. and Canadian models : 120V, 60Hz General model : 230V, 50Hz Dimensions (W x H x D) : 251x 285 x 159 mm (9.8" x 11.2" x 6.3") Weight : 4 kg (8 lbs 13 oz) BASS AMPLIFIER AMPLIFICATEUR DE GUITARE BASSE Mode d’emploi Nous vous remercions d’avoir fait l’acquisition de l’amplificateur de guitare basse BA-10 Yamaha. ...