To control your fixture in DMX mode, follow beginning on page 10 as well as the that are included with your DMX controller. 3. Use the controller’s faders to control the various DMX fixture traits. 4. This will allow you to create custom programs. 5. When using a DMX controller and setting up for DMX follow the dip switch settings on page 15. 6. For help operating in DMX operation consult the manual included with your DMX controller. 7. For longer cable runs (more than a 100 feet) use a terminat

Also, check that all cables are connected to the right connectors; it does matter which way the inputs and outputs are connected. 3. If DMX connectors are fairly short, ordinary microphone cables ©American DJ Supply® -- DJ Scan 250HP™ User Manual Page 11 may be used. For longer runs, this may cause data transmission problems (which will show up as random or incorrect movements) for best result, use proper balanced data transmission cable. Unit does not respond to sound; 1. Be sure the audio sens

Please read the following Manual before installing or using your new unit. 5 1. CHDR Warning Label 2. Projection Aperture 3. Remote receiving sensor 4. Aperture Label 5. Non Interlocking Housing Label 6. Mini plug External Power supply 7. Emission Indicator Switch 8. Shutter Control Switch 9. Power Switch 10.Identification Label 11.Battery Cover (bottom) 12.Mode Select 13.Connection for interlink cable 14.External sensor connection 15.Certification Label 15 7 8 910111213 14 DAN

In the unlikely event your unit may require service please contact your nearest American DJ dealer. Please recycle when ever possible. Do not discard the shipping carton in the trash. HALOGEN LAMP WARNING! This fixture is fitted with a halogen lamp which is highly susceptible to damage if improperly handled. Never touch lamp with your bare fingers as the oil from your hands will shorten lamp life. Also, never move the fixture until the lamp has had ample time to cool. Remember, lamps are not

Never touch lamp with bare fingers as the oil from your hands will shorten lamp life. Also, never move fixture until lamp has had ample time to cool. Remember, lamps are not covered under warranty conditions. The American DJ Aquarius™ comes with a 90 day limited warranty. We recommend filing out the warranty registration card included with your product to validate your warranty. For all service please contact your nearest American DJ® dealer or see us on the web: Operating Instructions: This

Every Aquarius II™ has shipped in perfect operating carton for damage that appears to be damaged, carefully be sure all equipment necessary In the event damage has been contact our toll free customer support Please do not return the unit to your contacting customer support Unpacking: Every Aquarius II™ has been thoroughly tested and been shipped in perfect operating condition. Carefully carton for damage that may have occurred during the carton appears to be damaged, carefully inspect damage and

It has two operating modes consisting of DMXand MASTER modes, which allows to receive and send DMX signals. In DMX mode, it features 4 channel individual DMX address setting. In MASTER mode, it is incorporated with 6 operating modes, MANUAL DIMMER, MANUAL PROGRAM, AUTO PROGRAM, HOLD SOUND, PROG SOUND and AUTO SOUND. In addition, multiple units can be connected to be used together, one as a DMX dimmer pack and the others as chase controllers. Also, STAND BY, FULL ON and PREHEAT functions are inco

For your convenience this product has been tested and is ready to be used, there is no assembly required. Please read the following instructions before installing or using your new unit. Product Description: The BPP-20™ is a 4 channel, 10A per channel power pack with a total capacity of 20 amps. Each channel features two 120V, 3-prong A/C sockets on the rear of the unit, individual fuse for each channel, and green LED lights indicating channels in use. The BPP-20™has two 8 pin din connectors l

For your convenience the BU-200 has been tested and is ready to be used, there is no assembly required. Please read the following instructions before installing or using your new Bubble Machine. Operating Instructions: Unit is ready to be set on flat surface. Pour standard bubble liquid or American DJ™ Bubble Juice, specially formulated for use with the BU-200, into front reservoir of unit, Plug unit into power. The BU-200 will immediately begin to produce bubbles. We suggest placing the unit

Never touch lamp ¡with bare fingers as the oil from your lhands will shorten lamp life. Also, never Jmove fixture until lamp has had ample ¡time to cool. Remember, lamps are not icovered under warranty conditions. C a ut i o n ! Always disconnect from main power before replacing lamps or servicing unit. Remember to always replace with same lamps and fuses. Mxei: Chameleon SPECIFICATIONS: TM Lamp: ZB-EFP 12V 100W Power: 110V/60Hz Optics: High Quality Glass Lens Ventilation: Conventional Wor