Any attempt to use another battery pack will cause damage to your spotlight and could possibly explode, cause a fire, or personal injury. MODEL BATTERY PACK CHARGER (M-ion) 315.113740 (130285003, (Mu(ti-Chemistry) 130285006) 315.259260 315.113710 (140351001) (130156001) BATTERY PACK 315.259260 315.115930 (Ni-Cd) (140351001) 1425301 _11041) 315.115730 130279005 (140301003) (Item No. 911375) 130279003, 315.115720 (140301001) • Remove battery pack from spotlight before replacing bulb or performing

6 V Halogen Weight ..................................................................... 1.5 Ibs. LOCK-0N BUTTON SWITCH TRIGGER Fig. 1 KNOW YOUR SPOTLIGHT LOCK-ON BUTTON See Figure 1. The lock-on button is convenient for continuous use for The safe use of this product requires an understanding extended periods of time. of the information on the product and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all

To reduce the risk of burns, do not touch a hot lens. [] Read all the instructions before using the appliance. [] To reduce the risk of injury, close supervision is necessary when an appliance is used near children. [] Do not use outdoors. [] To reduce the risk of electrical shock, do not put flashlight or charger in water or other liquid. Do not place or store appliance where it can fall or be pulled into atub or sink. [] Use only the charger supplied by the manufacturer to recharge. [] Use onl

315.113911 Use worklight only with recommended Craftsman battery pack and charger (both sold separately) Save this manual for future reference WARNING: Read and follow all Safety Rules and Operating Instructions before first use of this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: 983000-465 2-04 [] Warranty..........................................................................................

Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1. SAVE THESE INSTRUCTIONS BATTERY PACK/CHARGER The battery pack and charger are not included with your worklight. They are both sold separately. When purchasing, use the following informat

• Maintenance Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: ® 983000-061 4-02 _lh CAUTION: Carefully read through this entire operator's manual before using your new worklight. Pay close attention to the Rules For Safe Operation, Warnings and Cautions. Safety, performance and dependability have been given top priority in the design of this worklight making it easy to maintain and operate. If you use your w

• Yellow LED Lighted and Red LED Flashing = Defective Battery Pack. IMPORTANT INFORMATION FOR RECHARGING HOT BA'n'ERIES Under extreme continuous use, the batteries in your battery pack will become hot. You should let a hot battery pack cool down for approximately 1 hour before attempting to recharge. When the battery pack becomes discharged and is hot, this will cause the red light on your battery charger to flash. When battery pack cools down, red light will glow continuously indicating fast ch

,_, WARNING: Batteries vent hydrogen gas and can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately. ,_ WARNING: Never use a battery pack that has been damaged or received a sharp blow. A damaged battery pack is subject to explosion. Properly dispose of a damaged battery pack

Green LED LED. After 30 minutes, reinsert battery pack in on indicates battery pack is fully charged and charger. If green LED continues to remain on, return charger is in trickle charge mode. Note: Green battery pack to your nearest Sears Repair Center for LED will remain on until battery pack is removed checking or replacing. from charger or charger is disconnected from Note: This situation only occurs when continuous use power supply. of your worklight causes the batteries to become hot. It d

2 • Introduction ................................................................................................................................................................. 2 • GeneraISafety Rules ................................................................................................................................................. 3 • Specific Safety Rules .............................................................................................................................