• Read, understand and follow these instructions for safe installation and operation. • Leave this manual with any party responsible for its use and operation. WARNING • • • Please read this entire manual before installation and using this pellet fuel- burning room heater. Failure to follow these instructions could result in property damage, bodily injury or even death. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Do not overf

This step is optional and not required for MF Parlor Stove to operate. Mount thermostat according to manufacturer specifications. Using a small flat head screwdriver, tighten remote thermostat wires into pins 7 and 8. See figure 19. remote thermostat terminals Figure 19: Remote Thermostat Terminals INSTALLATION AND OPERATION MANUAL Models MF3700, MF3800 Page 16 CumberlandStoveWorks.com 800-345-6007 OUTSIDE AIR CONNECTION Connection from the intake pipe (2” diameter pipe in rear of stove) to the

The new, true biofuel stove from Cumberland Stove Works has performed exceedingly well in our heating tests this year. Although customers have also chosen it over other stoves on style alone, we feel that the Cumberland MF Series is more efficient, more versatile, and is much easier to clean and maintain. Tri-X Heat Control is a big step forward in versatility and operator convenience as well as the room air fan filter for ease in maintenance. Greg Morse, WinterKeeper Farm Clear Lake, Wisconsin

The minimum floor protector material is 24 gauge sheet metal. The floor protector must extend 2” beyond each side and rear of the T-vent. 6”6” 6” 3” WARNING READ THIS ENTIRE MANUAL BEFORE YOU INSTALL AND USE THIS STOVE. FAILURE TO FOLLOW THE INSTRUCTIONS MAY RESULT IN PROPERTY DAMAGE, BODILY INJURY, OR EVEN DEATH. DO NOT INSTALL A FLUE DAMPER IN THE EXHAUST VENTING SYSTEM OF THIS UNIT. DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE. CHILDREN AND ADULTS SHOULD BE ALERTED TO

Before the fire gets hot, open the door and wipe the glass surface off with a damp rag. If after constant use, the glass might fill with ash deposits. You must clean the glass after the glass has cooled down. Do not touch the surface with your hands.Take a damp rag and wipe the glass clean. If this does not clean the glass use any non-abrasive liquid spray. DISPOSAL OF ASHES Ashes should be placed in a metal container with a tight fitting lid. The closed container of ashes should be placed on a