Assessments - 1, GPA: 4
(
)
)
|
Facilidade de uso
Samsung cannot guarantee non-genuine Samsung toner cartridge's quality. Service or repair required as a result of using non-genuine Samsung toner cartridges will not be covered under the machine’s warranty. 523. Maintenance Available accessories You can purchase and install accessories to enhance your machine’s performance and capacity. 523. Maintenance Available accessories You can purchase and install accessories to enhance your machine’s performance and capacity. Some features and optional goods may not be available depending on models or countries (see "Features by models" on page 7). Accessory Function Part name Memory module Extends your machine’s memory capacity. • CLP-MEM201: 128 MB • CLP-MEM202: 256 MB Tray 2 If you are experiencing frequent paper supply problems, you can attach an additional tray. • ML-3310ND/ML-3710 Series: MLS3710A • ML-3312ND/ML-3712 Series: MLS3712A IEEE 1284 parallel connector Allows you to use various interface. • When installing the printer driver with an IEEE1284 parallel connector, the machine might not be found and after installing the printer driver, only basic printing features are available. • If you want to check the machine's status or set the settings, connect the machine to a computer with a USB cable or a network. • If you use the IEEE 1284 parallel connector, you can not use the USB cable. ML-PAR100 533. Maintenance Available maintenance parts To purchase maintenance parts, contact the source where you bought the machine. Replacing maintenance parts can be performed only by 533. Maintenance Available maintenance parts To purchase maintenance parts, contact the source where you bought the machine. Replacing maintenance parts can be performed only by an authorized service provider, dealer, or the retailer where you bought the machine. The warranty does not cover the replacement of any maintenance parts once it has reached its “Average yield”. Maintenance parts are replaced at specific intervals to avoid print quality and paper feed problems resulting from worn parts, see table below. The purpose of which is to maintain your machine in top working condition. The maintenance parts below should be replaced when the life span of each item has been met. Parts Average yielda Transfer roller Approx. 100,000 pages Fuser unit Approx. 90,000 pages Pickup roller Approx. 90,000 pages Retard roller Approx. 60,000 pages a. It will be affected by the operating system used, computing performance, application software, connecting method, media type, media size and job complexity. Redistributing toner 3. Maintenance 54 When the toner cartridge is near the end of its life: • White streaks or light printing occurs and/or density variation side to side. • The Status LED blinks red. If this happens, you can temporarily improve print quality by redistributing the remaining toner in the cartridge. In some cases, white streaks or light printing will still occur even after you have redistributed the toner. 1 Open the front cover and pull the toner cartridge out. 2 Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge. If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water: hot water sets toner into fabric. Do not touch the green underside of the toner cartridge. Use the handle on the cartridge to avoid touching this area. 3 Redistributing toner 3. Maintenance 55 3 Hold the toner cartridge by the handle and slowly insert the cartridge into the opening in the machine. 4 Close the front cover. Ensure that the cover is securely closed. Replacing the toner cartridge 3. Maintenance 56 Click this link to open an animation about replacing a toner cartridge. When a toner cartridge has reached the end of life, the machine will stop printing. 1 Open the front cover and pull the toner cartridge out. 2 Remove the new toner cartridge from its bag. 3 Remove the label from the toner cartridge as shown below. 4 Thoroughly shake side to side the cartridge five or six times to distribute the toner evenly inside the cartridge. If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water: hot water sets toner into fabric. Do not touch the green underside of the toner cartridge. Use the handle on the cartridge to avoid touching this area. 3 Replacing the toner cartridge 3. Maintenance 57 5 Hold the toner cartridge by the handle and slowly insert the cartridge into the opening in the machine. 6 Close the front cover. Make sure that the cover is securely closed. Upgrading a memory module 3. Maintenance 58 Your machine has a dual in-line memory module (DIMM). Use this memory module slot to install additional memory. Order information is provided for additional memory module. (See "Available accessories" on page 52.) 1 Installing a memory module 1 Turn the machine off and unplug all cables from the machine. 2 Grasp the control board cover and remove it. 3 Remove the new memory module from its bag. 4 H...
Este manual também é adequado para os modelos :Impressoras - ML-3300 (11.59 mb)
Impressoras - ML-3310D (11.59 mb)
Impressoras - ML-3310ND (11.59 mb)
Impressoras - ML-3310ND/TMX (11.59 mb)