Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
9 Arrows Navigates available values by moving to the next or previous options. 1 Display Shows the current status and prompts during an operation. 2 (Menu) Enters menu mode and scrolls through the available menus. 3 OK Confirms the selection on the display. Control panel overview 211. Introduction .... 14 Type C 1 2 3 4 5 8 7 6 9 10 5 Eco Enters eco mode to reduce toner consumption and paper usage (see Control panel overview 211. Introduction .... 14 Type C 1 2 3 4 5 8 7 6 9 10 5 Eco Enters eco mode to reduce toner consumption and paper usage (see "Eco options" on page 47). 6 (Cancel) Stops an operation at any time. 7 (Power) You can turn the power on and off with this button. 8 (Status LED) Shows the status of your machine (see "Status LED" on page 75). 9 (WPS) If your wireless access point supports Wi-Fi Protected Setup™(WPS), you can configure the machine easily without a computer (see Advanced Guide). 10 Arrows Navigates available values by moving to the next or previous options. 1 Display Shows the current status and prompts during an operation. 2 (Menu) Enters menu mode and scrolls through the available menus. 3 OK Confirms the selection on the display. 4 (Back) Sends you back to the upper menu level. Turning on the machine 1. Introduction 22 1 Connect the machine to the electricity supply first. Turn the switch on if the machine has a power switch. 2 Press the (Power) button, then release. Installing the driver locally 1. Introduction 23 A locally connected machine is a machine directly attached to your computer using the cable. If your machine is attached to a network, The software CD should automatically run and an installation window will appear. 231. Introduction Installing the driver locally A locally connected machine is a machine directly attached to your computer using the cable. If your machine is attached to a network, The software CD should automatically run and an installation window will appear. skip the following steps below and go on to installing a network connected machine’s driver (see Advanced Guide). • If you are a Macintosh, Linux, or Unix OS user, refer to the Advanced guide. • The installation window in this User’s Guide may differ depending on the machine and interface in use. •Selecting Advanced Installation > Custom Installation allows you to choose which programs to install. • Only use a USB cable no longer than 3 meters (118 inches ). ....Windows 1 1 Make sure that the machine is connected to your computer and powered on. If the “Found New Hardware Wizard” appears during the installation procedure, click Cancel to close the window. 2 2 Insert the supplied software CD into your CD-ROM drive. 3 3 Select Install Now. 4 4 Read License Agreement, and select I accept the terms of 5 5 the License Agreement. Then, click Next. Follow the instructions in the installation window. 241. Introduction Reinstalling the driver If the printer driver does not work properly, follow the steps below to reinstall the driver. ....Windows 241. Introduction Reinstalling the driver If the printer driver does not work properly, follow the steps below to reinstall the driver. ....Windows 1 1 Make sure that the machine is connected to your computer 2 2 and powered on. From the Start menu, select Programs or All Programs > 3 3 Samsung Printers > your printer driver name > Uninstall. Follow the instructions in the installation window. 4 4 Insert the software CD into your CD-ROM drive and install the driver again (see "Installing the driver locally" on page 23). 2. Menu overview and basic setup After installation is complete, you may want to set the machine’s default settings. Refer to the next section if you would like to set or change values. This chapter provides information about the overall menu structure and the basic setup options. • 2. Menu overview and basic setup After installation is complete, you may want to set the machine’s default settings. Refer to the next section if you would like to set or change values. This chapter provides information about the overall menu structure and the basic setup options. • Menu overview 2 •Printing a demo page 4 • Changing the display language 5 • Media and tray 6 • Basic printing 17 machine or use the machine’s functions. • These menus can be accessed by pressing (Menu) button. Press the arrows until the needed menu item appears and press OK. • An asterisk (*) appears next to the currently selected menu. • Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine. • For models that do not have the display screen on the control panel, this feature is not applicable. • Some menu names may differ from your machine depending on its options or the models. 282. Menu overview and basic setup Menu overview The control panel provides access to various menus to set up the Items Options Information Menu Map Configuration Supplies Info. Demo Page PCL Font PS Font EPSON Font Usage Counter Account Report Layout Or...
Este manual também é adequado para os modelos :Impressoras - ML-3300 (11.59 mb)
Impressoras - ML-3310D (11.59 mb)
Impressoras - ML-3310ND (11.59 mb)
Impressoras - ML-3310ND/TMX (11.59 mb)