Assessments - 2, GPA: 4
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
To see the explanation, point to the item with the mouse. •Refer to the User’s Guide for more information about printer driver functionality. • To print with good quality, we recommend that you use the printer at temperatures from 15°C to 30°C. Print Head Maintenance If Blurring Occurs or If a Specific Colour Does Not Print Perform print head cleaning to improve the print quality. Ensure that the printer is pluged in and follow the instructions below. • Windows Open the printer driver settings screen and click the Maintenance tab. Click the Cleaning icon. See page 11 for details on how to open the setting screen. • Macintosh Open the Page Setup dialog box and click the Utilities button. Click the Cleaning icon. When the Printer Runs out of Ink Replace the empty ink tank with a new one. Specify the following ink tanks when purchasing. Ink Tank BCI-24 Color Ink Tank BCI-24 Black 1 Open the front cover. The cartridge holder moves to the centre. 2 Remove the empty ink tank. Do not touch the lock lever. You do not need to remove the print head. colour black lock lever 3 Install the new ink tank. Close the front cover when finished. .Note When you enable the low ink warning, reset the ink counter of the ink tank installed. Refer to the User’s Guide for more detailed procedures and information about maintenance. 1 2 Ensure the computer and printer areconnected using the USB cable and thatthe printer is turned on. Select Start, Settings and Control Panel. In Windows XP, after clicking the Start button, select Control Panel. Select Printers and Other Hardware. 3 Double-click System. If displayed with an exclamation mark ( ! ) 4 If the System icon is not displayed for Windows Me users, click on view all Control Panel options on the left-hand side of the screen. Click the Device Manager tab. For Windows XP, click the Hardware tab then 5 click Device Manager. Double-click Universal Serial Bus controllers. 6 Check that Canon S200 is displayed. • If displayed, installation is complete. • If displayed with an exclamation mark (!), If Other Devices is displayed installation was not successful. Delete and reinstall. • If nothing is displayed or Other Devices is displayed instead, installation was not successful. Delete and reinstall. Refer to the User’s Guide for details on how to delete unknown devices. Notes on Handling the USB Interface (for Windows Users) If installation of the printer driver does not proceed as instructed in this Quick Start Guide, there may be a problem with the USB driver installation. Try reinstalling the printer driver. Reinstalling If you cannot proceed beyond the connection destination screen: 1 Click Cancel. 2 When the Abort Installation screen is displayed, click Abort. 3 When the Terminate Installation screen is displayed, click OK. 4 Unplug the printer. 5 Reinstall the printer driver (see page 7). If the installation still does not proceed as instructed, check the status of the USB driver following the procedures described below. Checking the USB Driver Status For Further Details... For more information, place the Setup Software & User’s Guide CD-ROM in the CD-ROM drive. User’s Guide Contents The “User’s Guide” is in PDF format and can be found on the same CD-ROM as the printer driver. You can view this Guide on screen and print out any sections you require. Contents • Printer parts and their functions • Printer driver functions • Routine maintenance How to View the User’s Guide For Windows (1) Load the CD-ROM in your computer. (2) Click View Documentation. If Acrobat Reader is not installed or Acrobat Reader 4.0 is installed, a message appears. Click Yes. Follow the instructions on screen to install the program. The User’s Guide will appear once installation is complete. • Printing media • Troubleshooting • Specifications For Macintosh (1) Load the CD-ROM in your computer. If Acrobat Reader 3.0 or later is not already installed, double-click the Acrobat Reader 4.0 folder in the CDROM folder, then double-click Reader Installer. Follow the instructions on the screen to install Acrobat Reader. (2) Double-click the Manual folder. (3) Select a language folder. (4) Double-click the icon for the S200_UG_UK.pdf file. BJ Printer Driver Systems Requirements For Windows • Windows XP, Windows Me, Windows 2000, Windows 98 • USB interface * Use a computer on which Windows XP, Windows 2000, Windows Me, or Windows 98 has been preinstalled (including computers preinstalled with Windows 98, Windows Me upgraded to Windows 2000). • 15MB of available hard-disk space for Windows 98/Windows Me • 25MB of available hard-disk space for Windows 2000 • 16MB of available RAM for Windows 98 • 32MB of available RAM for Windows Me/Windows 2000 For Macintosh • Macintosh series computer equipped with USB interface • Preinstalled Mac OS 8.6 - Mac OS 9.X • 30MB of available hard-disk space (including temporary storage space) • 12MB of available RAM (unused block) Additional Systems Requirements for User's Guide To insta...