See installation instructions for additional details. 2.2
(914 mm) C C Cooktop 1 1/2" (38 mm) Typical counter top 3/4” Min.* 36" Typ. (914 mm) A B Warming Drawer (19 mm) C 120 Vac electrical receptacle 27"/30"/36" Dacor single oven D Warming Drawer 120 Vac Elect. Warming Drawer 120 Vac Elect. D Toe Kick 5/8" Min.* A (16 mm) Model “A” Cutout Width “B” Min. Width to Adjacent Doors/ Drawers “C” Cutout Height “D” Min. Vertical Gap Between Cutouts IWD24 22 1/4” (565 mm) 24 1/4”* (616 mm) 9 1/8” (232 mm) 1 1/16”* (27 mm) EWD24 EWD27 25 1/4” (641 mm) 27 1/4”*
© 2007 Dacor, all rights reserved. Table of Contents Table of Contents Before You Begin... ........................................................... 1 Important Safety Instructions .......................................... 1 General Safety Precautions ............................................. 2 Installation Specifications................................................3 Verifying the Package Contents....................................... 3 Installation Planning...........................
See installation instructions for additional details. CI.15
• If the electrical service provided does not meet the product specification, or does not conform to the NEC or local standards, do not proceed with the installation. Call a licensed electrician to correct the electrical service before proceeding. • Be certain to locate the electrical outlet in an accessible location, so that the warming drawer may be easily unplugged in the event that service becomes necessary. Installation Instructions Installation Instructions WARNING • • • To avoid personal
C Warming Oven . The specified minimum cabinet depth and width must be 120 VacD provided. The cabinet depth and width must completely electrical enclose the recessed portion of the oven. outlets C Warming Oven . Cabinet cutout dimensions must be used as indicated. All contact surfaces between the appliance and the cabinet must be solid and level. The oven support platform must be flush Toe Kick with the bottom edge of the cabinet cutout. 5/8” Min. A (16mm) . Make certain that you have everything
3 Operating Instructions........................................... 4 Care and Cleaning ................................................ 6 Before You Call for Service..................................... 7 Warranty and Service............................................ 8 Warranty Card ........................................Back Cover Part No. 102344 Rev. D © 2007 by Dacor, all rights reserved. Important Safety Instructions Installer: Leave theSe InStruCtIOnS WIth the appLIanCe. Customer: reaD
(914mm) Typical countertop 1 1/2" (38mm) \__i Warming Oven ■ A B =•=-«— 3/4" Min. f (19mm) C 5/8" Min. (16mm) -120 Vac electrical outlet Model “A” Cutout Width “B” Min. Width to Adjacent Doors/Drawers “C” Cutout Height “D” Min. Gap Between Cutouts IOWO24 22 9/16” (573mm) N/A* 12 1/8” (308mm) N/A* IWO24 22 1/2” (572mm) EWO24 24 1/4” (616mm) EW27 27 1/4” (692mm) 1 1/16” (27mm) EWO27 IWO27 N/A* N/A* MW27 MWO27 27 1/4” (692mm) PW27 25 1/2” (648mm) 9 1/8” (232 mm
Dimensions shown provide minimum clearances, unless otherwise noted. Be certain that proper clearance is provided for the drawer door when it is in the open position. The specified minimum cabinet depth and width must be provided. The cabinet depth and width must completely enclose the recessed portion of the drawer. Cabinet cutout dimensions must be used as indicated. All contact surfaces between the appliance and the cabinet must be solid and level. The drawer support platform must be flush wi
4. Do not touch surfaces that may be hot. Always use hot pads or potholders until the appliance is cooled. 5. Before using for the first time, check if voltage indicated on the base of the appliance corresponds to the voltage in your home. 6. Do not turn on the power unless this appliance is properly assembled. 7. Do not operate this appliance with a damaged cord or plug, or after the appliance malfunctions, or has been damaged in any manner. Return it to the nearest authorized service facility