Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
English ACCESSORIES WARNING: ALWAYS use Only authorized HITACHI replacement parts and accessories. NEVER use replacement parts or accessories which are not intended for use with this tool. Contact HITACHI if you are not sure whether it is safe to use a particular replacement part or accessory with your tool. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage. NOTE: Accessories are subject to change without any obligation on the part of the HITACHI. STANDARD ACCESSORIES (1)Plastic Case (Code No. 323130) ...............................................................................1 (2)Side Handle (Code No. 303659)...............................................................................1 (3)Depth Gauge (Code No. 310331) .............................................................................1 OPTIONAL ACCESSORIES...........sold separately 1. Drilling anchor holes (Rotation + Hammering) . Drill Bit (Slender shaft) (1) Drill Bit (Slender Shaft) (2) Adaptor for slender shaft (SDS-plus shank) (1) Drill Bit (Slender Shaft) (2) Adaptor for Slender Shaft Outer diameter Effective Length Overall Length Code No. Code No. 1/8" (3.4 mm) 1-25/32" (45 mm) 3-35/64" (90 mm) 306369 3063709/64" (3.5 mm) 1-25/32" (45 mm) 3-35/64" (90 mm) 306368 English . Drill Bit (Taper shank) and taper shank adaptor Cotter (Code No. 944477) (1) Drill Bit (Taper Shank) (2) Taper Shank Adaptor (SDS-plus shank) External dia. Code No. 7/16" (11 mm) 944460 1/2" (12.3 mm) 944461 1/2" (12.7 mm) 993038 9/16" (14.3 mm) 944462 9/16" (14.5 mm) 944500 11/16" (17.5 mm) 944463 7/8" (21.5 mm) 944464 Taper mode Code No. Applicable drill bit 7/16" (11 mm) 1/2" (12.3 mm) Morse taper (No. 1) 303617 Drill bit (Taper shank) 1/2" (12.7 mm) 9/16" (14.3 mm) 9/16" (14.5 mm) 11/16" (17.5 mm) Morse taper (No. 2) 303618 Drill bit (Taper shank) 7/8" (21.5 mm) A-taper 303619 Taper shank adaptor formed A- taper or B-taper is provided as an optional accessory, but drill bit for it is not provided.B-taper 303620 . 1/2" (13 mm) Hammer Drill chuck and Chuck wrench For drilling operations when using a straight shank bit for impact driling with a rotary hammer 1/2" (13 mm) Hammer Drill Chuck (SDS-plus shank) (includes Chuck wrench) Impact Drill Application Straight shank Bit. . ... . Chuck wrench Name Code No. 1/2" (13 mm) Hammer Drill Chuck 303332 Chuck wrench 303334 Rubber Cap 303335 English 2. Knock-in anchor (Rotation + Hammering) Anchor Setter (for anchor setting) (SDS-plus shank)