Assessments - 2, GPA: 4 ( )

Fabricante : Casio Arquivo Tamanho: 4.38 mb Arquivo Nome : Língua de Ensino:

Example: The following is the submenu that appears when “Display Sequence Setup” is selected in step 2, above. c. Press the [ENTER] key. d. To return to the Viewer setup menu, press the [ESC] key. If [ENTER] is not displayed: Press the [..] or [..] key to select the setting you want (so its button is ). 6 6 Repeat steps 4 and 5 to configure other settings, if you want. 7 7 After all the settings are the way you want, press the [MENU] key to exit the Viewer setup menu. To restore all settings on the Viewer setup menu to their initial factory defaults 1 1 Press the [MENU] key to display the setup menu. 2 2 Press the [..] key to move the highlighting to “USB” and then press the [ENTER] key. 3 3 Press the [..] key once to move the highlighting to “Setup” and then press the [ENTER] key. • This will display the Viewer setup menu. 4 4 Press the [..] key to move the highlighting to “Initialize Viewer Setup” and then press the [ENTER] key. • This displays the dialog box shown below. 42 5 5 Use the [..] key to select “Yes”. 6 6 To restore all the settings to their initial defaults, press the [ENTER] key. • To exit the operation without doing anything, press [ESC] instead of [ENTER]. 7 7 To exit the Viewer setup menu, press the [ESC] key. Viewer Setup Menu Contents This section provides detailed explanations of all of the items included on the Viewer setup menu. The initial default setting for each item is indicated by an asterisk (*). Setting Name Description Image Zoom In the case of image sizes other than XGA, specifies whether or not to enlarge or reduce (zoom) images to fit the projection area. Zoom*: Turns on image zooming. No Zoom: Turns off image zooming. Display Sequence Setup Specifies the sequence of images in the file menu or presentation menu. File Names (Ascending)*: Displays files in file name ascending order. File Names (Descending): Displays files in file name descending order. Time (New-to-Old): Displays files by the time they were last modified, from the newest to the oldest. Time (Old-to-New): Displays files by the time they were last modified, from the oldest to the newest. Startup Mode Specifies whether the initial view when Viewer is started up is the thumbnail view or tree view. See “File Menu Operations” (page 30) for more information. Thumbnails*: Specifies thumbnail view. Tree: Specifies tree view. Image Switching Specifies the slideshow image change method. Manual*: Specifies manual image change. Auto: Specifies auto image change. Slideshow Display Interval Specifies how long each image will remain displayed during a slideshow. 5 seconds*, 10 seconds, 30 seconds, 1 minute, 5 minutes Slideshow Specifies the image transition effect to be used during a slideshow. Transition Effect Off, Slide In - Left to Right*, Slide In - Right to Left, Slide In - Top to Bottom, Slide In -Bottom to Top, Wipe -Left to Right, Wipe - Right to Left, Wipe - Top to Bottom, Wipe - Bottom to Top, Dissolve 43 Setting Name Description Slideshow Repeat Specifies whether or not slideshows and movie file playback should repeat when the end it reached. On: Slideshows and movie playback are repeated. Off*: Slideshows and movie playback are not repeated. Movie Display Specifies the display size during movie playback. Zoom*: Enlarges to the size of the projection area. No Zoom: Specifies the original size of the movie file. Initialize Viewer Setup Returns all Viewer setting menu items to their initial default settings. For details, see “To restore all settings on the Viewer setup menu to their initial factory defaults” on page 42. 44 Viewer Error Messages Message Cause Required Action There is a problem There is some problem Use EZ-Converter 1.1 to regenerate the with the slideshow with the presentation file entire set of presentation data (presentation setup file. Cannot created with EZ-Converter file and image files) and save the new data start the slideshow. 1.1. to the USB memory device or memory card. Folder does not There is no displayable • Use EZ-Converter 1.1 to generate contain any image folder, image file, or presentation data and save it to the USB files. movie file in the folder you are trying to access with Viewer. memory device or memory card. • Copy image files or movie files from your computer to the folder on the USB memory device or memory card. Cannot display an The image file cannot be Make sure the image files on the USB image file. displayed because it is too large to display within the projection area or because there is something wrong with it. memory device or memory card are no larger than 6 Mbytes. Important! Progressive JPEG image files are not supported. Could not find an One or more image files Use EZ-Converter 1.1 to regenerate the image file. that were saved as presentation data cannot be found. entire set of presentation data (presentation file and image files) and save the new data to the USB memory device or memory card. This movie file The file you are trying to • Convert the unsupported f...

Baixe o seu

Para fazer o download, introduza 2 dígitos :