Assessments - 2, GPA: 5 ( )

Fabricante : Casio Arquivo Tamanho: 4.38 mb Arquivo Nome : Língua de Ensino:

If this happens, reduce the number of folders and/or files in the folder. • Viewer supports up to 10 folder nesting levels on a USB memory device or memory card. Anything past the 10th nested folder is not displayed by Viewer. How can I get images to appear more quickly? When you select a BMP image or a large image file recorded with a digital camera on the Viewer’s image menu, it takes considerable time before the image appears. To ensure that images appear quickly during your presentation, use EZ-Converter 1.1 to convert the images to presentation data. This will cause images to be converted to JPEG images, which appear on the display more quickly. I am having a hard time getting the results I want when playing a slideshow. • Use EZ-Converter 1.1 to convert the images you want to use in the slideshow to presentation data. • In order to start a slideshow by highlighting an image file in a folder that is not a presentation data folder, you first need to use the Viewer Setup menu to configure slideshow settings (Slideshow Display Interval, Slideshow Transition Effect, Image Switching, Slideshow Repeat). 46 Performing a Presentation Using the YC-400/YC-430 Document Camera Performing a Presentation Using the YC-400/YC-430 Document Camera This section explains how to connect the CASIO YC-400/YC-430 Multi PJ Camera System (document camera) to the Data Projector in order to project the images of documents placed on the document stage of the document camera. The Data Projector’s built-in application named YC Camera is used to project document images. Important! A YC-400 document camera can be connected to the Data Projector only if the camera is running firmware version 1.1 or higher. For information about checking the firmware version of your YC-400 document camera, visit the CASIO website at: YC Camera Application Function and Operation Overview YC Camera is an application built into the Data Projector that makes it possible to control the YC-400/YC-430 document camera from the Data Projector. With the YC Camera application you can project the image of documents placed on the document stage of the document camera. Connecting the document camera to the Data Projector’s USB port and turning on the document camera will cause the YC Camera application to start up automatically. Connecting the Document Camera to the Data Projector This section provides the basic steps you need to perform in order to connect the document camera to the Data Projector and project the image of documents placed onto the document camera’s document stage. Important! • The procedure below assumes that the Data Projector’s plug-and-play feature is turned on (which is the initial default setting). If you have turned off plug-and-play, turn it back on before performing the procedure below. For more details about the plug-andplay setting, see “Setup Menu Contents” in the User’s Guide. • The resolution of recorded images is fixed at 4 megapixels when a YC-400/YC-430 Document Camera is connected to the Data Projector. The resolution setting cannot be changed in this case. 47 To connect the document camera to the Data Projector and project the image of a document 1 1 Turn on the Data Projector. • Wait until the Data Projector’s POWER/STANDBY indicator is lit green. 2 2 Connect the document camera to the Data Projector using the USB cable that comes bundled with the document camera. YC-400/YC-430 Document stage Camera Camera stand USB cable 3 3 With nothing on the document stage, press the [ ] (power) button on the camera stand. • This will turn on the document camera, which will cause its lens to extend. • The Data Projector will recognize the document camera and start up the YC Camera application automatically. When the YC Camera application starts up, the Data Projector will project an image of the document stage along with a dialog box for adjusting the document camera position. • If the document camera is positioned correctly, position adjustment will end automatically and the dialog box will close. At this time the monitor screen (the image being picked up by the document camera) will be projected. • If the document camera is not positioned correctly, a message prompting you to adjust the document camera position will appear. Follow the instructions shown in the message to adjust the document camera position. 48 4 4 Place the document whose image you want to project onto the document camera’s document stage. • Be sure to place the document in the center of the stage, and do not let any part of the document extend off the edges of the stage. • When placing a landscape orientation document onto the document stage, the top of the page should face towards the camera stand. • Initially the monitor image will be projected, and so the image will appear a bit fuzzy. • When the document camera senses that the document on the stage is not being moved, it will record its image and switch from th...

Baixe o seu

Para fazer o download, introduza 2 dígitos :