Menu Up Menu items Menu select pushbuttons Menu Down FIG. 1 Mio Modero DMS Device Family Specifications Mio Modero DMS (FG2408-01XX) Specifications Power 12 VDC / PoE: Maximum power consumption (PoE): • 5.5 Watts Maximum startup (rush) current (PoE): • 150 mA @ 50 VDC Maximum continuous current (PoE): • 100 mA @ 50 VDC Maximum power consumption (DC): • 5.0 Watts Maximum startup (rush) current (DC): • 525 mA @ 13.5 VDC Maximum continuous current (DC): • 350 mA @ 13.5 VDC Front Panel Components: •

Flip and turn the Mio R-1 device so that the buttons are facing away from you and the device is upside down. 2. Holding the device in both hands, place your thumbs on the battery door and push up to slide the battery door free. 3. Unscrew the 6 screw points indicated in FIG. 2. 6 Screw Points Programming Jack FIG. 2 Internal Mio R-1 Components 4. Turn the unit over so the buttons are facing you. 5. Lift the top assembly away from the PCB. 6. If necessary, push out the standard buttons from the f

The Mio R-2 can transmit in 38 KHz IR, 455 KHz IR, 418 RF (1-way) (FG147-418), 433 RF (1-way) (FG147-433), or 38 KHz and one of the RF frequencies. Selecting a source device sends a command to the master and runs predetermined events associated with that source. Selecting a macro will run predefined events, which might not be associated with sources listed, then return the device to its previous mode. You need KeypadBuilder to properly program this device. The application and documentation are a

While loading your configuration file make sure the device is situated as such that the batteries will not fall out. The load will fail if your batteries fall out during the process. The MIO communicates at 115200 baud rate. Refer to the MIO R-1 AUDIO Operation/Reference Guide for instructions on using the Programming Jack to load configuration files on the MIO R-1 AUDIO. Tone Control & SRS Setting To access the Tone Control and SRS settings, press the TONE button. This enables the Tone Control

REV Z 7 47 87 127 167 207 42 PLAY A 1 41 81 121 161 201 43 S. FWD Y 6 46 86 126 166 206 44 REW E 5 45 85 125 165 205 45 FWD D 4 44 84 124 164 204 Configuration Mode The configuration mode allows you to set the following device features: .. IR Transmit Mode (38 KHz, 455 KHz or both 38 KHz IR and RF) .. Timeout Adjustment .. Download Mode .. Debug Mode .. Battery Type .. LED Awake Brightness .. LED Sleep Brightness To enter configuration Mode: 1. Press and hold the STOP button and the INPUT button

AMX EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS LIMITED WARRANTY. EXCEPT AS OTHERWISE LIMITED BY APPLICABLE LAW, AMX RESERVES THE RIGHT TO MODIFY OR DISCONTINUE DESIGNS, SPECIFICATIONS, WARRANTIES, PRICES, AND POLICIES WITHOUT NOTICE. Table of Contents Table of Contents Overview ............................................................................................................1

8 shows the wallbox mounting dimensions for the single and double style Mio Modero. AMX recommends mounting the Mio Modero in a standard one-gang wallbox, a conduit box per NEC specs section 370, with a minimum internal clearance of 2-5/8" x 1-3/4" x 1-5/8" (HWD), but it is possible to mount the Mio Modero to a podium without a wallbox. 2.250 [57.2 MM] [83.4 MM] 3.282 [50.8 MM] 2.000 FIG. 8 Mio Modero Single Style mounting dimensions 2.250 [57.2 MM] [83.4 MM] 3.282 [50.8 MM] 2.000 FIG. 9 Mio Mod

3 Programming The Mio R-1 ..................................................................................5 Using Connector Ports on The Mio R-1..................................................................... 5 IR Code Matrix.......................................................................................................... 6 Configuration Mode ................................................................................................. 7 Setting The IR Frequency................

The two black adhesive-backed window shields (Figure 3) are included within each emitter package and allow for alternate configurations. With this shield (surrounding the internal emitter), you can restrict IR reception through the device’s control window by blocking any interference or IR signals produced by sources other than the internal emitter. Without this shield, any incoming IR signal can pass through to the IR control window and overlap signals sent via the emitter (Figure 1). Note: Eac

If this device is installed in a manner such that the radio module FCC ID. label is not visible on the outside of the end product, a label must be placed on the end product with the following statement: "Contains FCC ID. CWU-NXR-MO" This device complies with Part 15 of the FCC rules. Subject to the following two conditions: 1. This device must not cause harmful interference and 2. This device must accept all interference, including interference that interferes with the operation of this device.