Inspection and repairs Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation. Do not use the appliance if any part is damaged or defective. Have any damaged or defective parts repaired or replaced by an authorized repair agent. Before use, check the power supply cord for signs of damage, ageing and wear. Do not use the appliance if the power supply cord or mains plug is damaged or def

Insert the battery pack into the charger (figure B) as described in the charger section of this manual. SWITCHING ON AND OFF (FIGURE F) To start, slide the On/Off switch forward (i.e. “O”= Off, “I” = On). To stop, slide the switch back. If the tool does not turn on, check to see if one of the two Black & Decker VPXTM battery packs is depleted. To determine which pack is depleted, pull the trigger and observe the label on the back of the tool above the batteries. Remove the battery pack correspon

Service Information Black & Decker offers a full network of company-owned and authorized service locations throughout North America. All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under “Tools— Electric” or

This appliance includes some or all of the following features (fig. A). 1. On/off switch 2. Speed control switch 3. Cord rewind button 4. Handle 5. Cover 6. Hose 7. Airflow control switch 8. Extension tube 9. Suction head 10. Wheels In addition, this appliance is supplied with some or all of the following accessories (fig. B): 11. Crevice tool 12. Brush tool 13. Wooden floor brush 14. Filter cleaning brush 15. Turbo brush Features A 8 3 9 10 4 1 2 5 6 7 B 11 12 13 14 15 Connecting the hose (fig.

4. If the power pack does not charge properly – (1) Check current at receptacle by plugging in a lamp or other appliance. (2) Check to see if the receptacle is connected to a light switch which turns power off whenyou turn out the lights. (3) Move charger and power pack to a surrounding air temperature of +40°F (4.5°C) to +105°F (40° C). (4) If the receptacle and temperature are OK, and you do not get proper charging, take or send the power pack and charger to your local Black & Decker service c

The remaining accessories in Fig. 1 are shipped in the unit carton and can be stored in the storage bag provided. Note: Make sure accessories are securely attached before use. Accessories Fig. 11 The accessories provided can be used in various combinations, depending on the task you need to do. Refer to Fig. 11 for arrangements of accessories to complete some typical tasks. Note: Make sure accessories are securely attached before use. BLOWING ACCESSORIES - Fig. 12 - 16 WARNING: Always wear eye p

VACUUM ACCESSORIES ACCESSORIES - FIG. 3, 10 Two of the Hand Vac accessories are stored on board; the brush and crevice tool. They are positioned as shown in Fig. 3. See Fig. 10 for insertion of these tools into the bowl. The remaining accessories in Fig. 1 are shipped in the unit carton and can be stored in the storage bag provided. Note: Make sure accessories are securely attached before use. TURBO BRUSH ACCESSORY CAUTION: Keep hair, loose clothing and all parts of body away from rotating brush

(Brighton) 617 MICHIGAN: Detroit 48219, 18133 W. McNichols Rd. 313 Detroit 48234, 11360 East Seven Mile Road 313 Grand Rapids 49509, 3662 Clyde Park Ave., S.W. 616 MINNESOTA: Minneapolis 55408, 2815 Nicollet Ave. 612 MISSOURI: Kansas City 64108, 2705 McGee Trafficway 816 St. Louis 63110, 615 S. V? 'deventer Ave. ........... 314 Telephone No. 324-6691 AL 8-1332 FR 2-3040 7724050 Rl 9-0371 ТЕ 4-5944 444-3188 280-3331 241-9162 871-7278 787-5531 222-0621 249-6241 779-3808 533-1147 356-2951 681-

This system, utilizes an approved 3-conductor power cord and 3-prong grounding type attachment plug, which should be used with the proper grounding type receptacle, in accordance with the National Electric Code, Canadian Electrical Code, and Underwriters’ Laboratories specifications. If your unit requires less than 150 volts It has a plug that looks like Fig, “A”. It will fit directly into the proper type of 3-wire grounding receptacle. The unit is then grounded automatically each time it is pl

Never pull cleaner by cord or yank it . to disconnect from receptacle, Keep cord from heat, oil and sharp edges, 4. DISCONNECT TOOLS, When not in use, before servicing, when emptying cleaner. 5. AVOID ACCIDENTAL STARTING. Be sure switch is off when plugging in, 6. OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension cords suitable for use outdoors and so marked. 7. DO NOT OPERATE vacuum cleaner in gaseous or explosive atmospheres. Motors in these tools normally spark,