These must be removed and the appropriate wood side cheeks fitted before the amplifier is first used. See page 5 for full details. 2. Please retain the carton and all packing materials provided with this equipment so that it may be repacked correctly if it ever becomes necessary to transport the unit or to return it for service. , 3. If servicing is required then the equipment should be properly packed and returned to the dealer from whom it was purchased. It is essential to include a covering

aux in” label. Dig. RF in: Connect the source’s S-Video output to the mini-DIN connector under the S-Video “dig. RF in” label. 16 LD in: Connect the LD player’s S-Video output to the mini-DIN connector under the S-Video “LD in” label. VCR in: Connect the VCR's S-Video output to the mini-DIN connector under the S-Video “VCR in” label. VCR out: Connect the VCR’s S-Video input to the mini-DIN connector under the S-Video “VCR out” label. Video aux in: Connect the source’s S-Video output to the

In particular, much use has been made of the "Stealth Mat" material normal found in the company's premium FMJ range. This strategy, for reducing stray electromagnetic interference in combination with critical vibration dampening, ensures every last ounce of performance is realised from the unit's audiophile grade components. Gold plated RCA phono and speaker sockets complete what is a feature packed amplifier with stunning performance at the price. Recognising that not all stereo systems operat

. You can check the progress of the recording at any time by pressing the TAPE button again. VCR OPERATION The AV8 has a fully independent VCR loop for audio and video (Composite and S-video only). This can be configured to record the source you are watching to or to record any other input using the ‘Record to VCR’ option in the ‘Main Menu Screen 2’. . Pressing the VCR button selects audio and video from the VCR input. . If the ‘Record to VCR’ option is set to Source (its default setting), the V

Replace the AC fuse only with one identical in type and rating as printed on the rear panel. DO NOT USE ANY SUBSTITUTE FUSES WITH DIFFERENT RATINGS OR VALUES. Failure to observe this precaution may cause serious damage to the amplifier circuits, may create a hazard fire, and may void the warranty. If the Power LED does not glow, it may be an indication that the AC fuse has blown. If you are using the 12V DC Triggering feature it may be possible that there is a problem with that connection. To de

This may be necessary if it is not possible to sit centrally between the speakers. In normal use leave in the central 'click' position. © ZONE 1 - Push the button in to activate the ZONE 1 preamp out sockets. With the button in the out position the ZONE 1 preamp out sockets are muted. © ZONE 2 - Push the button in to activate the ZONE 2 preamp out sockets. With the button in the out position the ZONE 2 preamp out sockets are muted. © HEADPHONES SOCKET - Accepts headphones rated between 8 ohms

Always ensure that the volume control on your amplifier is set to minimum before starting these procedures. Bi-wiring your loudspeakers Bi-wiring improves the sound of your system because it divides the high and low frequency signal currents into separate speaker cables. This avoids signal distortions arising from the high and low frequency currents interacting with one another within a single cable, as in conventionally wired systems. You will need: Speakers – with four input terminals each: th

As you’ve already seen, it’s preprogrammed to control ADCOM’s GTP-830 Preamp/Tuner and the GCD-700/750 CD players. In addition, it has seven “component memory banks” available so you can program the remote to learn commands for your DVD player, satellite box, laser disc player, VCR, etc. This lets you use one remote controller for your entire system. Using Preprogrammed Commands Using the remote controller’s preprogrammed commands is simple. For most GTP-830 functions (volume up/down, changing s

If you have already an external phono amplifier that you wish to use, connect its output to one of the line-level inputs. e-7 loudspeakers Single wiring Single wiring is the conventional wiring method of running a single cable per channel between the amplifier and the speaker; this is the easiest technique. If each speaker has more than one pair of connecting terminals, use the terminals labelled Lf or ‘Low Frequency’ for each speaker. Connect the positive terminal of the right speaker connectio

This allows the amplifier’s power supply to discharge fully before it is switched on again. Bi-wiring and bi-amping loudspeakers BEFORE YOU START WARNING: Do not make any connections to your amplifier while it is switched on or connected to the mains supply. Before switching on please check all connections thoroughly, making sure bare wires or cables are not touching the amplifier in the wrong places (which could cause short circuits) and you have connected positive (+) to positive and negative