Keep this manual handy for future reference. These safety instructions are to ensure the long life of your DA1931CT and to prevent fire and shock hazard. Please read them carefully and heed all warnings. 1.1 GENERAL • Qualified ALTINEX service personnel, or their authorized representatives must perform all service. 1.2 INSTALLATION • To prevent fire or shock, do not expose this unit to rain or moisture. Do not place the DA1931CT in direct sunlight, near heaters or heat radiating appliances, or n

400-0199-006 2 SPECIAL APPLICATION ABOUT YOUR DA1931CT 2 TECHNICAL SPECIFICATIONS 3 DA1931CT Twisted Pair to Video + Audio Receiver The DA1931CT provides a means of receiving computer video and audio signals over Twisted Pair-type (CAT-5) cable when used together with an ALTINEX Twisted Pair Video Transmitter, such as the DA1930CT. The DA1931CT is compact and easy to use. The DA1931CT is able to receive one of the video sources such as RGBHV, component video, S-Video, or composite video, along w

could void the user’s authority to operate the equipment. ABOUT YOUR DISTRIBUTION AMPLIFIER 2 The DA1203RM Distribution Amplifier is designed to allow the connection of a single computer or other video source to as many as three scan-rate compatible display devices. Though primarily designed to pass RGBS format signals, the DA1203RM can also pass RGsB, Component Video (Y, R-Y, B-Y), S-Video (Y/C), and Composite Video by using the appropriate analog channels (Red, Green, Blue). The analog channel

The input termination is switch selectable to either be 600 Ohms or high impedance. The DAV0106-V1A2 Distribution Amplifier will allow the connection of video and audio amplifiers simultaneously. The DAV0106-V1A2 Distribution Amplifier is a state-of-the-art product with a bandwidth of 130MHz for video signals, which enables it to remain transparent to the incoming video signals passing through it. It also has a bandwidth of 10Hz to 20kHz for audio signals. The DAV0106-V1A2 can pass NTSC, PAL or

16. [CLR] This command clears the members for a single group or for all nine groups. Command Format: [CLRGkUi] k = group number (k = # from 1-9) i = unit number (i = # from 0-9) Example: To clear group #1, send the [CLRG1U1] command. This command clears the members for the specified group only. 13 MULTI-TASKER To clear all groups of unit 1, send the [CLR GU1] command. 17. [GkUi] This command is used to request group data. With the command, the user can identify which input or output of a particu

PATH OPERATION This command will set the path for the output, but it is not active until the switch command, [SW], is executed. Commands ending in "P" are not executed immediately. The path for outputs on multiple cards or the same card may be preloaded. Command Format: [OFFmCnP] m = Output no. (m = # from 1 to 4) Cn = Card ID (n = # from 1 to max slots) P = Path Example: There are two MT108-103 cards, C6 and C7. Disable Output 1 of C6 and Output 3 of C7 simultaneously using the following comman

These single ended signals allow the source to be distributed to large screen projectors or other displays with excellent quality at long distances. The DA1921SX is designed to be used together with a compatible CAT-5 computer video transmitter, such as model DA1920SX. The DA1921SX is connected to the transmitter using twisted pair CAT-5 UTP (Category 5, 5e, 6) type cable. The DA1921SX is compact and easy to use. It offers a CAT-5 input, two fully buffered outputs and equalization control. It is

Command Format: [LOD0CnUi] Cn = Card ID (n = slot # from 1 to max slots) Ui = Unit ID (i = # from 0 to 9) Example: Turn OFF the Loudness feature of the MT113-100/101 in slot #4 by sending the command [LOD0C4]. 19. [LOD1] This command enables the loudness feature. Command Format: [LOD1CnUi] Cn = Card ID (n = slot # from 1 to max slots) Ui = Unit ID (i = # from 0 to 9) Example: Turn ON the Loudness feature of the MT113-100/101 in slot #4 by sending the command [LOD1C4]. 20. [MUT0] This command ena

This system provides a lower cost and a higher performance alternative to the concept of feeding home runs (a run of cable) to a single large distribution amplifier. In the Serial Distribution System, up to thirty DA1904SX units may be installed at each monitor location along the bus, which is created by using VGA-type cables connected to the 15-pin HD input and loop output. Each monitor is fed from the RGBHV output. In this system, the DA1904SX units may receive their origin feed from an output

400-0435-005 2 SPECIAL APPLICATION ABOUT YOUR TP115-111 2 TECHNICAL SPECIFICATIONS 3 TP115-111 COMPUTER/COMPONENT TWISTED PAIR (TP) TO VIDEO + AUDIO RECEIVER The TP115-111 receives computer video and audio signals over Twisted Pair-type (CAT-5) cable when used together with an ALTINEX Twisted Pair transmitter, such as the TP115-110. As with the TP115-110, the TP115-111 is streamlined and lightweight for applications that have small space requirements. The unit offers video equalization for up to