Assessments - , GPA: ( )

Instruções de Operação Actiontec electronic, Modelo NS100-250

Fabricante : Actiontec electronic
Arquivo Tamanho: 3.14 mb
Arquivo Nome :

Língua de Ensino:

O documento está colocado, por favor, espere

Baixe o seu Fechar

O documento está colocado, por favor, espere

Baixe o seu Fechar

If backing up to the NAS Device, select the share where the backup-up data will be stored. When the sub-folder text box appears, enter the location of the sub-folder where the share will be stored. Other Device Enter the details of the remote device where data will be backed up or stored here. Name The name of other device, as seen on the network. Share Folder Enter the name of share folder. Depending on the direction of the backup, this is either the share to be backed up or the destination for the backed-up data. Access the Folder Requires Login If the share is password protected, click in this check box and enter the Login Name and Password required to gain access to the share. Schedule This text box displays the schedule options for when the backup will occur: • Never - disables this backup job. • Every Day - the backup job is performed each day at the specified time. • Every Monday, Every Tuesday… - select this option to have the backup performed once per week, on the specified day and time. • The time text box (hour, minute, AM/PM) - specify at what time the backup job should be performed. Hard Drive This screen allows the user to perform various disk operations on the USB hard disk drive. No operations can be performed on a USB flash drive. This screen has four sections: Prepare Disk, Self-Test (S.M.A.R.T.), Scandisk, and Standby Prepare Disk Perfrom a Prepare Disk operation when a new USB hard drive is connected to the NAS Device. M Warning: Performing a “Prepare Disk” operation will destroy any data on the disk. Once started, this process cannot be halted or reversed. Status The Status text box can have any of the following values: • Not installed - no disk is inserted, or connection or disk has failed. • Not Prepared - disk has been detected, but not ready for use (press the “Prepare Disk” button to prepare the disk for use). • Preparing - only displayed after the “Prepare Disk” button is pressed. (See below for details). • Prepared - disk is ready for use. Prepare Disk Click here after installing a new disk. The disk will be partitioned and quick-formatted. Any data on the disk will be lost. M Warning: Performing a “Prepare Disk” operation will destroy any data on the disk. Once started, this process cannot be halted or reversed. Self-test (S.M.A.R.T.) S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) can warn of impending problems with the hard disk before it actually fails. This test should be performed regularly. Disk Status This can have any of the following values: • N/A - no disk is available. • Not Tested - No S.M.A.R.T. check has been performed on this drive. • Test OK - No errors were found in the last test. • Errors - The S.M.A.R.T. check found errors on the drive (drive should be replaced). Run Test Select the the day and time to perform a S.M.A.R.T. test (select “Never” to prevent S.M.A.R.T. from running automatically). Test Now Run a S.M.A.R.T. test immediately. Scandisk Running a Scandisk (Disk Check) test checks the file system and corrects any errors found. This program should be run regularly. The Scandisk program will also run automatically if an error condition is detected, such as an abnormal shutdown due to loss of power. Disk Status The “Disk Status” text box can have any of the following values: • N/A - No disk is available. • No Scan performed - No Scandisk has been performed recently on this drive. • Scandisk in progress - Scandisk operation is in progress. The disk cannot be used while a Scandisk is in progress. If required, use the “Start/Stop” button to terminate the Scandisk operation and gain access to data on the disks. (To see the results of the Scandisk operation, use the “View Disk Log” button.) • Scandisk completed - The last Scandisk operation has been completed. Use the “View Disk Log” button to view the results. • Scandisk terminated - The last Scandisk operation was cancelled by the administrator before it was completed. • Run Scandisk - Select the day and time to perform a Scandisk operation. (Select “Never” to prevent Scandisk from running automatically.) Run Scandisk Select the the day and time to perform a Scandisk test (select “Never” to prevent Scandisk from running automatically). Start/Stop If a Scandisk is in progress, click this button to terminate the Scandisk immediately. Otherwise, clicking here starts the Scandisk operation. The Scandisk operation may take a few hours, and the disk is unavailable to users while the Scandisk is in progress. Standby The USB drive can be configured to go into standby (or “sleep”) mode here. Set Hard Disk to standby mode after: Enter the period of idle time after which the hard disk drive switches to standby mode here. Save Click to save the settings on this screen. This has no effect on any operations in progress. Cancel Restore the settings on the screen to their values after the last “Save” operation. Clicking “Cancel” has no effect on any operations in progress. Disk Log Use this to view the resu...