Page 2 GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. ¦ ¦¦¦¦¦Do not allow children or untrained individuals to use this unit. ¦ ¦¦¦¦¦Never start or run the engine inside a closed area; breathing exhaust fumes can kill. ¦ ¦¦¦¦¦Wear eye protection which is marked to comply with ANSI Z87.1 as well as hearing protection when operating this equipment. ¦ ¦¦¦¦¦Keep all
Do not operate without guard(s) in place. Always disconnect the spark plug before performing maintenance or accessing any movable parts. ¦ ¦¦¦¦¦Do not point the blower nozzle in the direction of people or pets. ¦ ¦¦¦¦¦Never run the unit without the proper equipment attached. When used as a blower, always install the blower tubes. When used as a vacuum, always install the vacuum tubes and vacuum bag. Make sure the vacuum bag is completely zipped when the unit is running to avoid flying debris. ¦
SYMBOLS SAVE THESE INSTRUCTIONS Page 5 Page 6 Fig. 1 PRODUCT SPECIFICATIONS Weight ......................................................................................................................................................................... 9.7 lbs. Engine displacement .......................................................................................................................................................30cc Air Velocity: MPH ............................................
CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. CAUTION: (Without Safety Alert Symbol) Indicates a situation that may result in property damage. SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTER for repair. When servicing, use only identical replacement parts. WARNING: To av
n Before storing, allow the engine to cool. ..n Empty fuel tank and restrain the unit from moving before transporting in a vehicle. n To reduce the risk of fire and burn injury, handle fuel with care. It is highly flammable. n Do not smoke while handling fuel. n Mix and store fuel in a container approved for gasoline. n Mix fuel outdoors where there are no sparks or flames. n Select bare ground, stop engine, and allow to cool before refueling. ..n Loosen fuel cap slowly to release pressure and t
If engine does not start, move choke lever to CHOKE and repeat normal starting procedure. If engine still fails to start, repeat procedure with a new spark plug. 4. Contact a servicing dealer. Turn “L” needle counterclockwise 1/16 turn. If “L” low needle can not be turned counterclockwise, do not force plastic limiter caps. Contact a servicing dealer. See Figure 14. Turn “H” needle counterclockwise 1/16 turn. If “H” high needle can not be turned counterclockwise, do not force plastic limiter cap
CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. CAUTION: (Without Safety Alert Symbol) Indicates a situation that may result in property damage. SAVE THESE INSTRUCTIONS Page 6 Page 7 Fig. 1 PRODUCT SPECIFICATIONS Weight ......................................................................................................................................................................... 9.8 lbs. Engine displacement ............
WARNING: Never run the unit without the vacuum tubes, vacuum bag, and vacuum handle installed. Failure to heed this warning could result in serious personal injury. Fig. 13 OPERATION VACUUM OPERATION See Figure 13. WARNING: Never run the unit without the vacuum tubes, vacuum bag, and vacuum handle installed. Failure to heed this warning could result in serious personal injury. Fig. 13 • Install the vacuum tubes and bag. Refer to Installing the Vacuum Bag and Installing the Vacuum Tubes. • Start
When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for buying a Homelite product. SAVE THIS MANUAL FOR FUTURE REFERENCE 2 TABLE OF CONTENTS nIntroduction2 ..nGeneral Safety Rules3 ..nSpecific Safety Rules4 ..nSymbols5-6 ....nFeatures7-8 ....nAssembly9-11 ..nOperation12-15 ..nMaintenance16-17 nAccessories17 ..nTroubleshooting18 nWarr
Failure to do so could result in possible serious personal injury. WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. NOTE: Read and remove all hang tags and store with your Operator’s Manual. ASSEMBLY WARNING: Stop the engine and disconnect the spark plug wire before installing parts, making adjustments, clean