Log:
Downloads : 2   Arquivo Tamanho: 416 kb   Fabricante : Simer Pumps  
Categoria : Sistemas de ventilação
@name@name@name

See Step 1. Inlet Hose 4 KEEP THE HOSES AS STRAIGHT AS POSSIBLE To reduce friction, do not coil or kink the hoses. When pumping from a well or stream, raise the inlet hose a few inches off the bottom to avoid sucking in sand, silt or pebbles (which can disable the impeller). Install a strainer or the Pud-L-ScoopTM (included only with Model M40P-04) to protect the pump from large solids. NOTICE: Attach the Pud-L-ScoopTM to the end of the inlet line and place it in at least 1/2" of water at the lo

Downloads : 11   Arquivo Tamanho: 416 kb   Fabricante : Simer Pumps  
Categoria : Sistemas de ventilação
@name@name@name

Pages 2-6 Installation/Fonctionnement/Pieces Pour plus de renseignements concernant l’utilisation, l’installation ou l’entretien, Composer le 1 (800) 468-7867 Francais ................. Pages 7-11 Instalacion/Operacion/Piezas Para mayor informacion sobre el funcionamiento, instalacion o mantenimiento de la bomba: Llame al 1-800-468-7867 Espanol ...............Paginas 12-16 SIM782 (Rev. 6/7/05) Safety SAFETY INFORMATION Use this pump only on a 115 Hazardous volt circuit. Pump is equipped voltage





categorias