Assessments - 4, GPA: 3.8 ( )

Fabricante : JVC Arquivo Tamanho: 2.67 mb Arquivo Nome : Língua de Ensino:

• You can change the device type at a later time using the Inputs > Name menu (page 47). Any “learned” NetCommand IR codes will be erased, however. Changing Devices on an HDMI Input: 1. Disconnect the HDMI device. 2. Turn off the HDMI input in the Inputs > Name menu. 3. Connect the new device and the Auto Input Sensing screen will display. If you want the device under NetCommand IR control, perform NetCommand “learning” for the new device. Note for Analog A/V Receivers When you disconnect an analog A/V receiver, be sure to manually change the Speakers setting to TV to hear sound from the TV speakers. Controlling A/V Receiver Sound Volume Although the TV detects when you connect an A/V receiver, you must use one of the methods below to control sound volume from the A/V receiver. With a Standard TV Setup (all models) • Recommended Method: Program the TV’s remote control for your A/V receiver and enable the Audio Lock feature. See Appendix C, page 65. • Program the TV’s remote control for your A/V receiver and set the TV remote’s slide switch to the AUDIO position to control A/V receiver volume. Set the switch back to the TV position to control the TV. • Use the remote control that came with the A/V receiver. With an HDMI CEC-enabled A/V Receiver (all models) The TV’s remote control may control some or all functions of the A/V receiver without further setup. Connect the A/V receiver to the TV with an HDMI cable and test the TV’s remote control with the slide switch in the TV position. With NetCommand Control of an A/V Receiver (736 and 835 series models) • Set up NetCommand control of the A/V receiver’s volume functions in the Inputs > AVR menu. The TV’s remote will then automatically control A/V receiver volume. See page 57. • Use any of the methods described for the standard TV setup. 2. TV Setup About Home-Theater Control Systems This summary outlines the control methods available using the TV’s remote control. You may wish to use one or more of these methods for your home theater. Case 1: The source device you want to control is connected directly to the TV If the source device has CEC capability: • a. Check the device’s owner’s guide and enable the device’s CEC functionality before connecting to the TV’s HDMI input. Wait for the TV to recognize the device and switch to it. b. Experiment with the TV’s remote control (slide switch set to TV) to determine which device functions it can operate. See “NetCommand for HDMI Devices” on page 28. TV CEC Enabled Source Device HDMI Cable If the TV is a 736 or 835 series model (any connection type): • Set up NetCommand IR control of the source device’s keys as desired. See “IR Emitter Placement,” page 52, and “Initial NetCommand Setup for Most Devices,” page 53. TVSource Device Any Connec tion Type For any TV model (any connection type): • Program the remote control to operate the source device. To control the device, set the slide switch to the correct position for the device type. See Appendix C, “Programming the Remote Control.” Case 2: The source device you want to control is connected to an A/V receiver connected to the TV If the A/V receiver has CEC capability: • a. Check the A/V receiver’s owner’s guide and enable the A/V receiver’s CEC functionality before connecting to the TV’s HDMI input. Wait for the TV to recognize the device and switch to it. b. Try using the TV’s remote control to operate volume and mute functions. See “NetCommand for HDMI Devices” on page 28. c. If the connected source device has CEC capability: i) Enable the device’s CEC functionality before connecting to the A/V receiver’s HDMI input. Wait for the TV to recognize the device and switch to it. ii) Test using the TV’s remote control to determine which device functions it can operate. Note: If the source device is connected to the A/V receiver by another connection type (e.g., component video, S-video), see the alternative control methods below. TV CEC Enabled Source Device CEC-Enabled A/V Receiver HDMI Cable HDMI Cable If the TV is a 736 or 835 series model (any connection type): • a. Set up NetCommand IR control of the A/V receiver’s keys as desired. See “IR Emitter Placement,” page 52, and “Setting Up NetCommand Control of an A/V Receiver,” page 57. b. Set up NetCommand IR control of the source device’s keys as desired. See “Initial NetCommand Setup for Most Devices,” page 53. For the special case of NetCommand IR control of a device connected to an HDMI A/V receiver, see “NetCommand IR Control of a Device Connected to an A/V Receiver with HDMI Output,” page 61. TV Source Device A/V Receiver Any Connec tion Type Any Connec tion Type For any TV model (any connection type) • a. See Appendix C, “Programming the Remote Control.” b. Program the remote control to operate the A/V receiver. To control the A/V receiver, set the slide switch to AUDIO. c. Program the remote control to operate the source device. To control the device, set the slide switch to the correct position for the device type...

Baixe o seu

Para fazer o download, introduza 2 dígitos :