Assessments - 4, GPA: 3.8 ( )

Fabricante : Hitachi Arquivo Tamanho: 3.74 mb Arquivo Nome : Língua de Ensino:

However, NetCommand will not be able to control this device. Later you may use the “Change” option in the Edit NetCommand menu to learn the remote control signals. After selecting Next>, the screens that follow are: the AV Receiver Inputs screen (Figure 7), Name screen (Figure 10), Monitor Out screen (Figure 11), ending with the Finish screen (Figure 12). A/V Receiver Inputs Figure 7 If you select “Other” as the manufacturer, you will see the A/V Receiver Input screen after selecting “Learn” and pressing ENTER. After selecting the number of inputs, this screen will not appear again. Depending on your A/V Receiver’s capability, you may connect up to to seven (7) A/V inputs. Select the number of inputs by pressing ADJUST or . If the number of connected inputs changes, you will need to delete the A/V Receiver through Edit NetCommand and add it again, as described above. Figure 6. A/V Receiver screen Figure 7. A/V Receiver Input screen Edit NetCommand®, Adding an A/V Receiver, continued A/V Receiver Input Learn Screen Figure 8 NetCommand can now learn the remote control signals used to select each input on the A/V Receiver. 1. Press ADJUST or on the TV remote to select the check box for each function to be learned. 2. Press ENTER and the function name will begin to flash to confirm the ready-to-learn status. 3. Press the button on the A/V Receiver’s remote control that corresponds to the selected function. A check mark will appear and the function name will stop flashing. This confirms the signal learned status. 4. To test the learned command, press ENTER on the TV remote. The A/V Receiver will perform the selected function. The A/V Receiver needs to be turned on and the IR emitters properly placed for the test to be successful (see page 22 for IR emitter placement). 5. To customize the input names, press ADJUST to move to the Input Name text box and then press ADJUST or and ENTER to select each letter of the name. These names will appear on the Review screen as the A/V Receiver’s input names. 6. To erase the learned input signal, highlight the check box for that input and press CANCEL. 7. Repeat for each connected input. 8. When the input selection signals have been learned and the inputs named, press ADJUST to select Next> and move to the A/V Receiver Learn screen. A/V Receiver Learn Screen Figure 9 1. Press ADJUST or on the TV remote to select the check box for each function to be learned. 2. Press ENTER and the function name will begin to flash to confirm the ready-to-learn status. 3. Press the button on the A/V Receiver’s remote control that corresponds to the selected function, A check mark will appear and the function name will stop flashing. This confirms the signal learned status. 4. To test the learned command, press ENTER on the TV remote. The A/V Receiver will perform the selected function. The A/V Receiver needs to be turned on and the IR emitters properly placed for the test to be successful (see page 22 for IR emitter placement). 5. Repeat for each function to be learned. 6. To erase a learned function, highlight the check box for that function and press CANCEL. 7. When the function signals have been learned, press ADJUST to select Next> and move to the Name screen. Figure 9. A/V Receiver Learn screen Hint: If your A/V Receiver remote control uses a single button for both Power On and Power Off, do not learn the Power Off function. If your A/V Receiver uses a single button to toggle between digital and analog sound, then learn only Analog to Digital. If your A/V Receiver automatically switches between analog and digital audio, then you will not need to learn either Analog to Digital or Digital to Analog functions. Figure 8. A/V Receiver Input Learn screen Edit NetCommand®, Adding an A/V Receiver, continued Name Screen Figure 10 The Name screen allows you to change the default name for the A/V Receiver to a custom name of up to eight characters (including a blank space), selecting from letters, numbers, and nine different characters. Using the TV’s remote, press ADJUST or to select each letter, then press ENTER to move to the next position. Press CANCEL to delete the current letter and move back one character position. When in the first position, the CANCEL button will return the name to the default name. Monitor Out to AVR Screen Figure 11 Use this screen to select the input on the A/V Receiver that is connected to Monitor Output, Audio 2 on the television. Note: Monitor Output, Audio Video 1 is for analog recordings with a VCR. Figure 11. Monitor Out to AVR screen Figure 10. Name screen Finish Screen Figure 12 To finalize your selections and complete the A/V Receiver setup, select Finish from the Finish screen. Note: If you connected individual devices audio output directly to the A/V Receiver, you must use the “Change” function of Edit NetCommand and select the individual device to assign the correct A/V Receiver input to be used with each device. Figure 12. Finish screen Edit NetCommand®, Addi...

Baixe o seu

Para fazer o download, introduza 2 dígitos :