Assessments - 1, GPA: 4 ( )

Fabricante : Jumpking Arquivo Tamanho: 1.06 mb Arquivo Nome : Língua de Ensino:

Use gloves during the assembly procedure. Lay out all frame sections in a rectangle (See Fig. 1). The frame consists of 3 main components (4 components for the JT714): Please refer to page 18 for parts numbers. Step 2 2A - Slide the leg base ends into the sockets on the side rails. 2B - Then slide the end rails onto the side rails. For model JT714 only: 2C - Attach ieg/end braces into the sockets on the top rail and leg brace (at C figure 2). 2D - You will need four (4) springs for this assembly phase. At each leg brace attach a spring to the spring retainer on the leg brace and to a retainer (hook point) on the end rail. The tension spring must be tight, not loose ( at D figure 2). This is now called the FRAME ASSEMBLY FIGURE 2 Top view ncr -Ü ^~4~ —Ü n PARTS: 1 End rail 2 Side rail 3 Leg base 4 Leg/end brace (JK714 only) FIGURE 1 Page 14 Lay out the trampoline mat (bed) on the ground in the center of the frame assembly. The springs attach to the "V" bar(s) on the mat (bed) and the spring retainer(s) that are welded to the inside of the upper frame (see Fig. 3A). When attaching springs from the mat (bed) to the frame, use a spring as a puil tool. This is done by hooking the pull tool onto thp 3k of the spring you are attaching to the frame and ig the spring to the frame (see Fig. 3B). Initially attach 2 springs at each corner. Attach one to the side rail and one to the end rail (see Fig. 3C). Attach the re si of the springs by using the following sequence: Attach 2 springs at the center of each side. Then add several springs to each side of these - moving around the perimeter of the trampoline. When attaching springs you should attach the same number of springs on the ends and sides; alternating to keep an even tension on the springs. You should be installing from the center to the corners (see Fig 4). FIGURE 3 FIGURE 4 Attach the frame pads to the frame by hooking the clip under the the spring retainer on the frame and then pressing the tubular clip down (firmly) over the top tubing portion of the frame (see Fig. 5). CAUTION: Use of this trampoline is not recommended without the frame pad, which is designed to reduce the likelihood of Injury to the user from coming into contact with the fran ¡6 Ol li 10 trampoline. If you do not have a frame pad, contact your Jumpking dealer or Jumpking. FIGURE 5 Page 15 S^Hi! Now attach the safety instruction placard using the enclosed tie wrap. Place it at the point where you will normally mount the trampoline. The tie wrap should go around a vertical frame joint and a top rail to keep it from moving laterally (See Figure 6). Access {optional part) - Hook the ladder over a side rail at m: .rampoline. This should be the normal access point. Do not access the trampoline from the end. When the trampoline is not in use, remove the ladder and store in a secure location (See Figure 6). {gjgjggljj FIGURE 6 Weaths ■ Cover (optional part) - This cover should be placed over the bed and frame pad. Use the attached tiedown straps to secure the cover to the frame. ASSEMBLY SS NOW COMPLETE. Make sure that ail parts are securely assembled. Familiarize yourself and all users of the trampoline with the care and maintenance instructions, use and instructional materials, and warranty and safety precautions contained in this manual before •} trampoline. DISASSEMBLY To disassemble, follow the assembly steps in reverse order. Do not attempt to disassemble any frame components before the mat (bed’ nd springs have been removed. MOVING the TRAMPOLINE If you need to periodically move your trampoline it should be moved by at least two people, kept horizontal, and lifted slightly, j-.v' .amble the trampoline for any other type movement. Jumpking has an accessory Tie Down Kit -see page 18 and 17 for model number and how to order SPECIAL CONSIDERATIONS mm It is possible for the trampoline to be blown about by a high wind. If you anticipate high winds, the trampoline should be moved to a sheltered location, disassembled, or the round outside portion (top frame) should be tied to the ground using rope and stakes. At least four tie-downs should be used (at each corner). Do not simply secure the legs to the ground, as they can puii out of the frame sockets. Page 16 CARE AND MAINTENANCE CARE Do not allow family pets on the trampoline, as daws may snag and pull the mat (bed) material or damage the frame pad. The trampoline is intended to be used by one person at a time. The user should be either barefoot, in socks, or wearing gymnastic shoes. Street shoes or tennis shoes should not be worn on the trampoline. The user should remove all sharp objects from their person which may cause injury or damage to the trampoline mat (bed). Heavy, sharp or pointed hard objects should not contact the mat (bed) surface. MAINTENANCE Your trampoline is manufactured using quality materials and is finely crafted to provide you and your family with many years of en...

Baixe o seu

Para fazer o download, introduza 2 dígitos :